AUDIX : Dp Elite 8 AUDIX

8-Piece Drum Microphone Package

หมายเลขสินค้า : Dp Elite 8

video

ราคา 79,900^.00 บาท

สินค้าหมดชั่วคราว
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีดำ

ฟรี!

ประกัน 1 ปี
ฟรี!

ปรึกษาด้านเทคนิก

8-Piece Drum Microphone Package

ชุดไมโครโฟนสำหรับจ่อกลองชุดแบบ 8 ไมค์ AUDIX DP-ELITE 8 Complete 8-Mic Drum Package ในชุดประกอบด้วยไมค์จ่อกระเดื่อง D-6 kick drum mic 1 ตัว, ไมค์จ่อสแนร์ i5 snare 1 ตัว, ไมค์จ่อกลองทอม D-2 Tom mic 2 ตัว, ไมค์จ่อฟลอร์ทอม D-4 1 ตัว, ไมค์สำหรับไฮแฮท SCX1C และไมค์ Over Head SCX1HC 2 ตัว พร้อมแคลมป์จับ และ กล่อง Aluminum carrying case

The DP Elite 8 professional drum pack is the ultimate combination of 8 microphones needed to mike up a 5 piece drum kit. All microphones perform equally well whether it be on a live stage or in the studio. Included in the DP Elite 8 drum microphone package is the D6, Audix’s flagship dynamic kick drum microphone, two D2’s for rack toms, one D4 dynamic microphone for floor tom, the i5 for snare, a pair of SCX1C’s for overhead miking, and the SCX1HC for hi-hat. Also included are four DVICE rim mount clips for the snare and tom microphones, and three heavy-duty tension fit microphone clips for the SCX1 microphones.

Everything is conveniently packaged in a foam-lined aluminum carrying case for safekeeping when the microphones are not in use.

Audix I5 Cardioid Microphone

The I5 features a cardioid polar pattern with a linear frequency response, capable of accurately reproducing signal at high sound pressure levels (SPL).

Audix D2 Hypercardioid Microphone

The Audix D2 drum microphone features the frequency and sensitivity response required for accurately reproducing signals from drums and percussion instruments.

Audix D4 Hypercardioid Microphone

With a polar pattern an sensitivity characteristics much like the D2, the D4 features a tailored frequency response suitable for low frequency percussion such as toms and kick drums.

Audix D6 Hypercardioid Microphone

The Audix D6 is a cardioid dynamic low frequency instrument microphone suitable for kick drums, bass cabinets etc. The cardioid polar pattern rejects off-axis noise and ambiance caused by additional instruments, monitors etc.

Audix SCX1 Cardioid Condenser Microphone

The Audix SCX1/C features a cardioid polar pattern which is effective in off-axis signal rejection, providing a low noise floor and high gain-before-feedback while using near monitors and speakers. Transformerless circuitry and surface mount technology provide a compact profile and quiet signal response with a low noise floor.

Audix SCX1HC Hyper-Cardioid Condenser Microphone

With sound characteristics much like the cardioid version, the SCX1HC delivers a hypercardioid pattern for even greater rejection of off-axis noise and feedback.

Features :

All-in-one solution for miking drums
Instrument-specific mics for optimal results
Rugged Audix quality
Great for stage and studio
Dflex clips for easy positioning
Road case

i5 Spec :
- Transducer Type : Dynamic
- Frequency Response : 50Hz – 16kHz
- Polar Pattern : Cardioid
- Output Impedance : 280ohms
- Sensitivity : 1.6mV/Pa @ 1k
- Capsule Technology : VLM Type B
- Off-Axis Rejection : >23dB
- Maximum SPL : =140dB
- Power Requirements : None
- Connector : 3-pin XLRm
- Polarity : Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials/Finish : Zinc Alloy/Black Finish
- Weight : 248g/8.7oz
- Length : 141mm/5.6in

D2 Spec :
- Transducer Type : Dynamic
- Frequency Response : 68Hz–18kHz
- Polar Pattern : Hypercardioid
- Output Impedance : 280ohms
- Sensitivity : 1.2mV/Pa @ 1k
- Capsule Technology : VLM Type B
- Off-Axis Rejection : >30dB
- Maximum SPL : =144dB
- Power Requirements : None
- Connector : 3-pin XLRm
- Polarity : Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials/Finish : Black Hard Coat
- Weight : 128g/4.5oz
- Length : 100mm/3.9in

D4 Spec :
- Transducer Type : Dynamic
- Frequency Response : 40Hz–18kHz
- Polar Pattern : Hypercardioid
- Output Impedance : 280ohms
- Sensitivity : 1.4mV/Pa @ 1k
- Capsule Technology : VLM Type D
- Off-Axis Rejection : >20dB
- Maximum SPL : =144dB
- Power Requirements : None
- Connector : 3-pin XLRm
- Polarity : Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials/Finish : Black Hard Coat
- Weight :128g/4.5oz
- Length : 100mm/3.9in

D6 Spec :
- Transducer Type : Dynamic
- Frequency Response : 30 Hz–15kHz
- Polar Pattern : Cardioid
- Output Impedance : 280ohms
- Sensitivity : 0.8 mV/Pa @ 1k
- Capsule Technology : WLM Type E
- Off-Axis Rejection : >20dB
- Maximum SPL : =144dB
- Power Requirements : None
- Connector : 3-pin XLRm
- Polarity : Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials/Finish : Machined Aluminum/Black Finish
- Weight : 254g/8.9oz
- Length : 117mm/4.6in

SCX1C Spec :
- Transducer Type : Dynamic
- Frequency Response : 40Hz-20kHz
- Polar Pattern : Cardioid, Hypercardioid
- Output Impedance : 200ohms
- Sensitivity : 0.8mV/Pa @ 1k
- Capsule Technology : 26mV (C), 17 mV (HC)/Pa @ 1k
- Off-Axis Rejection : >120dB
- Maximum SPL : =130dB
- Power Requirements : None
- Connector : 48-52V phantom
- Materials / Finish : Machined Brass/Black Finish
- Weight : 114 g/4 oz
- Length : 104 mm/4.1 in

SCX1HC Spec :
- Transducer Type : Dynamic
- Frequency Response : 40Hz-20kHz
- Polar Pattern : Cardioid, Hypercardioid
- Output Impedance : 200ohms
- Sensitivity : 0.8 mV/Pa @ 1k
- Capsule Technology : 26mV(C),17mV(HC)/Pa @ 1k
- Off-Axis Rejection : >120 dB
- Maximum SPL : =130dB
- Power Requirements : None
- Connector : 48-52Vphantom
- Materials/Finish : Machined Brass/Black Finish
- Weight : 114g/4 oz
- Length : 104mm/4.1 in