Earthworks : 1022-ZDT Earthworks Audio

Two Channel Zero Distortion Technology Preamp (1 rack space)
หมายเลขสินค้า : 1022-ZDT

ราคา 109,610.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

Two Channel Zero Distortion Technology Preamp (1 rack space)
 
ปรีแอมป์ ZDT ที่มีรายละเอียดชัดเจน จำนวน 2ช่อง ตอบสนองความถี่ตั้งแต่ 1Hz ถึง 200kHz (+ 0.5dB) มี Phantom 48V สำหรับไมโครโฟน และมีความผิดเพี้ยนน้อย ทำให้มั่นใจได้ในเรื่องคุณภาพเสียงระดับมืออาชีพ 
 
Earthworks 1022 is part of the ZDT Distortion Preamplifier series and is based on discrete circuitry designed by David Blackmer. These preamps are fast, clean and very transparent producing a new standard of sonic excellence in electronics. With frequency responses ranging from 1Hz to 200kHz + 0.5dB, a rise time of 0.27 microseconds and distortion of less than 1 part per million (0.0001%) it eliminates the possibility of sonic degradation.  
 


Features:
  • Zero Distortion – less than one part per million
  • High output level +30dBu
  • Very low output impedance will drive long lines without interference or signal loss
  • True 48 volt phantom, polarity reverse & clip indicator
  • Separate XLR & 1/4” Phone (t-r-s) outputs, each with its own gain/level controls
  • 1/4” phone connector output will drive balanced or unbalanced inputs
  • Full differential (balanced) from XLR in to XLR out – no internal conversion to single-ended
  • All discrete components; Class A amplification (no ICs in the signal path)
  • Greater transparency with minimum signal path and minimum features

  • Preamp Type: Solid State
  • Number of Channels: 2
  • Frequency Response: 2Hz to 100kHz ±0.1dB, 1Hz to 200kHz ±0.5dB
  • Impulse Response: 1.4µs
  • Distortion: XLR out: less than 1ppm (0.0001%); 1/4” out: 0.001%
  • Input Noise: 1.6nVHz½ at 20dB gain; 0.6nV/Hz½ at 60dB gain
  • EIN: -132dBV at 20dB gain; -143dBV at 60dB gain
  • Slew Rate: 22V/µs
  • Output DC Offset: ±1 mV typical, servo balanced
  • Power Requirement: 120V AC (100V and 200-240V versions available)
  • Input: 2 XLR Female balanced transformerless
  • Input Impedance: 10KΩ phantom on, 100KΩ phantom off
  • Outputs:
  • 2 XLR Male balanced transformerless (stepped)
  • 2 ¼” TRS XLR Fem. balanced transformerless (variable)
  • Dimensions: 1 rack space 1.75” x 19” x 10.375”
  • Weight: 6 lb. (2.7kg)