iFi audio : Mercury Cable 3.0m (USB3.0 ‘B’ Connector) 1.0m iFi audio

Audiophile USB 3.0 B Cable for Computer/USB Audio and Data Transfer 1.0m

 

สายเคเบิ้ล Mercury 3.0m เชื่อมต่อแบบ USB 3.0 B ใช้ตัวนำเมทริกซ์เงินทองแดงแบบต่อเนื่องของ OFHC เพื่อการถ่ายโอนสัญญาณที่ดีที่สุด ความยาวสายที่ 1 เมตร

 

Shielded to the max

With quadruple shielding, the Mercury3.0 protects the cable from RFI and EMI noise to provide the cleanest transfer medium possible for the USB signal. This means sound quality is not compromised as with many ‘off the shelf’ versions where inadequate shielding is commonplace.

 

Exceptional from beginning to end

In the Mercury3.0 the signal runs through the cable and the connector. This means the connector too must be exceptional. Most USB cables use moulded plastic covered connections that do not shield the high frequencies present in the USB data link, so noise will radiate out. Durability is also compromised as very few make their own connectors.

The FINAL USB connectors provide impeccable end-to-end RF shielding, being machined entirely from solid, aircraft-grade aluminium. Plus gold-plated connections make for years of steadfast service.

 

The power of RF3

Most standard USB cables do not address RF issues. Most ‘off the shelf‘ versions that are fitted with filters work over too narrow a range. And even then this is only fitted at the ends of the cables, leaving the length of the cable to act as an antennae.

The Mercury3.0 is fitted with three custom-made metal oxide ceramic RF noise silencers. Each has a different effective range so that they greatly broaden the range over which RF noise is silenced. Furthermore, the middle silencer is adjustable and can be moved along the whole length of the cable. This then “detunes” the antennae formed by the cable, depending on the conditions and requirements in the system. The other 2 silencers should be kept as close to each respective end as possible.

 

A match made in USB heaven

The Mercury3.0 is a perfect match with the iGalvanic3.0 and the micro/nano USB3.0. The iGalvanic3.0 fully galvanically isolates the USB3.0/2.0 signal and power.

The micro/nano USB3.0 both boast a Super Regulator, not only with super low-noise (0.1uV/0.5uV) but also with super low output impedance (around 0.00015 Ohm at 1KHz, as low as 0.00003 Ohm at 100Hz to DC) to maximise the total USB connection.

Features :