Microphone Preamp Module for Symphony I/O
โมดูลสำหรับระบบ Symphony อินพุตแบบอนาล็อกไมโครโฟนพรีแอมป์ 8 ตัว และยังสามารถเชื่อมต่ออินพุต Instrument สูงสุด 4 ตัว เข้ากับโมดูลได้โดยตรง และตัวเชื่อมต่อ D-Sub คู่
The A8MP from Apogee is a module for the company's Symphony system that enhances the system's analog input by adding 8 microphone preamps. Additionally, up to 4 instrument inputs can be connected directly to the module and twin D-Sub connectors deliver 8 fully balanced inserts points.
Microphones do not connect directly to the Mic Preamp Module. They must be connected to the analog inputs of an analog I/O Module that has been installed in slot 1 of the Symphony chassis. The microphone preamps are then enabled in the Maestro software. Phantom power can also be enabled individually from the software.
Features :
-
8 Microphone Preamps
-
4 Instrument Inputs
-
Enhances Analog I/O (Module Required)
-
8 Balanced Insert Points
-
Phantom power individually switchable (via Maestro)
-
Four Hi-Z 1/4" instrument inputs capable of handling high level instruments
-
ADC : 24-bit
-
DAC : 24-bit
-
Sample Rates : Up to 192kHz
-
Analog In : 4 x 1/4" TS phone - 1 x 25-pin D-Sub Insert Returns (requires optional breakout cable)
-
Input Impedance 10kΩ
-
Maximum Input Level : +4dB setting: +24dBu / -10dB setting: +6dBV
-
Analog Outputs : 1 x 25-pin D-Sub Insert Sends (requires optional breakout cable)
-
Output Impedance : 25Ω
-
Maximum Output Level : ∞ to +24dBu
-
Digital Input Connectors : No
-
Digital Output Connectors : No
-
Dynamic Range : A/D: 120dB, A-weighted - D/A: 129dB, A-weighted
-
THD + N A/D : -113dB @ 20dBu (0.00024%) - D/A: -117dB @ 20dBu (0.00014%)
-
Frequency Response : A/D: 1Hz to 20kHz (+/-0.05dB)@ 44.1kHz - D/A: DC to 20kHz (+/-0.05dB)@ 44.1kHz
-
Word Clock : On chassis
-
Power Requirements : From chassis
-
Dimensions : Fits slot on chassis