2 x 240W Commercial Amplifier with Direct Drive Technology and Energy Star Certification
หมายเลขสินค้า : FA2402
ราคา 17,850.00 บาท
ราคาปกติ : 21,000.00 บาท
ประหยัดไป 3,150.00 บาท
*ราคาไม่รวมภาษีมูลค่าเพิ่ม 7%
-
ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
-
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144 -
การผ่อนชำระ ผ่อนได้สูงสุด 3-10 เดือน
เลือกจำนวน :
เลือกสี : สีดำ
-
ฟรี!
ประกัน 1 ปี
-
ฟรี!
ปรึกษาด้านเทคนิก
แชร์ไปยัง :
2 x 240W Commercial Amplifier with Direct Drive Technology and Energy Star Certification
LAB GRUPPEN FAD2402 เพาเวอร์แอมป์ (เครื่องขยายเสียง) มีกำลังขับ 2×240 วัตต์ สามารถขับลำโพงทั้งแบบ Low-Z (4/8 โอห์ม) และ High-Z (70/100 V) ได้ ถูกออกแบบมาสำหรับงานติดตั้งระบบเสียง ตัวเครื่องมีขนาดกะทัดรัดและสะดวกต่อการใช้งาน และกินพลังงานน้อยกว่ารุ่นอื่นๆด้วย
2 x 240 Watt dual-channel Amplifier provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. Capable of delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations offering extreme flexibility on every channel. FA2402 is easy to install and operate – even for non-technical personnel. Simply put, the FA2402 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.
Not only does FA2402’s direct drive constant power technology provide superior audio performance and reliability, it also consumes less mains power than competing models, which has earned it Energy Star* certification.
This amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.
The FA2402 comes equipped with rubber feet, enabling the amps to be placed on a desk, shelf or any clear surface without any additional installation requirements. However, optional rack mounting hardware is also supplied, allowing one or several models to be housed and protected inside an enclosure. This adds extensive flexibility as a single product can be housed in a half 19" rack or full rack enclosure as well as a pair of amplifiers can easily be mounted side-by-side in a single rack space. With the included brackets the unit can also be mounted to a wall or under a table/shelf.
Features :
- 2 x 240 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Energy Star* certified design conserves energy and drastically reduces operational cost
- Direct drive, constant power technology for superior audio performance and reliability
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier input and output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
Maximum Output Power
- 4 or 8 Ω per channel : 240 W
Number of Ouput Channels
- Number : 2
Minimun Load Impedance
- 4 Ω mode : 4 Ω
- 8 Ω mode : 8 Ω
- 70 V output mode : 20 Ω
- 100 V output mode : 41 Ω
Controls
- Front : N/A
- Rear : Gain control, input sensitivty select (4 dBu / -10 dBV), load config (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter
Indicators
- Power : On (blue), standby (yellow)
- Limit (red LED), per channel : Input clip, output limit
- Signal (green LED), per channel : >1.23 mV (-56 dBu)
- Fault (red LED) : Overheat, DC fault, over current etc
System
- Inputs : 2 x 3-pin 5.08 mm Euroblock connector
- Input impedance : 10 kΩ unbalanced, 20 kΩ balance
- Input sensitivty : Balanced: 1.23 V (+4 dBu) or 316 mV (-10 dBV)
- Maximum input level : 9.75 V (+22 dBu)
- Outputs : 1 x 4-pin 5.08 mm Euroblock connector
- Output circuit type : Class D
- Remote connector : 2 x RJ45 Ethernet connecto
Performance
- Distortion, 1/8 rated power : <0.5%
- Frequency response : 20 Hz to 20 kHz, +0.5 / -1 dB
- Crosstalk : >65 dB
- Signal-to-noise : >100 dBA
- High-pass filter : 80 Hz HPF
Circuit Protection
- Cooling : Convection-cooled, fanless
- Amplifier protection : Thermal protection, over current protection, DC protection, high frequency protection
- Load protection : Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage
- Main voltage : 100-240 V~, 50/60 Hz with active power factor correction
- Power consumption 1/8th rated power @ 4 Ω : 120 W
- Mains connector : Standard IEC connector
Others
- Dimensions (H x W x D) : 44 x 218 x 280 mm (1.7 x 8.6 x 11.0")
- Weight : 2.6 kg (5.7 lbs)
- Finish : Brushed black anodized aluminum chassis with black painted steel bottom
- Approvals : CE, WEEE, CCC, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B, Energy Star 3.0
ไม่พบข้อมูล
เปิด จันทร์ - อาทิตย์
เวลา 9.30 - 18.30 น.
32 ซอยรามคำแหง 24 แยก 30 (หมู่บ้านศิขริน) แขวงหัวหมาก เขตบางกะปิ กรุงเทพมหานคร 10240
บริการให้คำปรึกษา
English Version : 082-623-6663