HEADRUSH : FRFR-108 MKII HEADRUSH

2,000-watt, 1 x 8" Powered Speaker Cabinet with High-frequency Driver, HPF, Ground switch, and Dedicated Bluetooth Channel
หมายเลขสินค้า : FRFR-108 MKII

ราคา 10,800.00 บาท

ราคาปกติ : 12,000.00 บาท

ประหยัดไป 1,200.00 บาท



เลือกจำนวน :

เลือกสี : Black

  • Black

  • รับประกันสินค้า

    ฟรี!

    ประกัน 1 ปี

  • ปรึกษาฟรี

    ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :
facebook twitter image อีเมล image

2,000-watt, 1 x 8" Powered Speaker Cabinet with High-frequency Driver, HPF, Ground switch, and Dedicated Bluetooth Channel

HeadRush FRFR-108 MKII is a powerful 2000-watt full-range flat-response guitar cabinet with Bluetooth®, 8” speaker, HF compression driver, two combo XLR + 1/4” inputs and XLR output.

 
Equipped with 2,000 watts of full-range, flat-response power, the impressively compact Headrush FRFR-108 II powered guitar cabinet will make the most out of your amp/effect modeling workstation. A 2-part speaker combo of an 8-inch woofer and a high-frequency compression driver reproduces your favorite presets in full sonic detail without even a hint of coloring from the cab itself. Looking to take to the stage? The FRFR-108 II’s dual combo XLR inputs, XLR direct output, ground switch, and built-in highpass filter grant you everything you need to send your ideal sound straight to the PA. Moreover, the FRFR-108 II upgrades the original Headrush FRFR-108 formula with Bluetooth capabilities — perfect for jamming along with tracks or streaming music between sets. Take your modeler’s tone to the next level with the Headrush FRFR-108 II powered guitar cabinet!
 
Features
  • Powerful, Professional Sound - 2000 watts of peak power ensures you have enough headroom for almost any live performance or rehearsal
  • Precision-Tuned for Amp Modelers - The cabinet design, 8” woofer, and HF compression driver are specially voiced for accurate, linear delivery of amplifier and cabinet emulations
  • Bluetooth® Enabled - Stream music wirelessly from your mobile device into FRFR-108 MKII’s dedicated Bluetooth® channel
  • All the Connectivity You Need - Two combo XLR + 1/4" inputs with independent volume controls and an XLR direct output allow for chaining speakers or sending to a front-of-house mix
  • Quickly Adapts to Venues and Rooms - FRFR-108 MKII has a ground lift switch for eliminating noise issues caused by ground loops and a HPF EQ switch to help cut through muddy stage mixes
  • Lightweight, Flexible and Sturdy - Weighing just 21lbs / 9.53kg, FRFR-108 MKII is rugged yet easy to transport and can be used in a wedge, upright, or pole-mounted position


Make the most of your modeler
Whether you’re running one of Headrush’s acclaimed modelers or other amp/effect workstations, a full-range, flat-response powered cabinet like the FRFR-108 II is essential. Why? While many guitar speakers and cabinets have a penchant for adding color and voice to your sound, a cabinet such as the FRFR-108 serves as a blank sonic canvas. This capability allows you to re-create your immaculately created patches onstage in full sonic detail, exactly mirroring the pre-produced sound you’d get recording your workstation straight into your DAW. Finally, the FRFR-108’s massive 2,000-watt power rating ensures that you’ll never want for volume or projection.
 
Destined for the stage
Scores of Sweetwater’s performing guitarists often send their tone straight to the PA, using their amp as a monitor onstage — a feature that the Headrush FRFR-108 II handles with ease, boasting two combo XLR inputs with dedicated volume knobs and an XLR direct output. Moreover, the FRFR-108 II also comes equipped with a built-in highpass filter and ground switch to fine-tune your tone and eliminate unwanted noise.
 
What’s new for the FRFR-108 II?
While the FRFR-108 II delivers all the most sought-after features of the original FRFR-108, this powered cab upgrades the formula with full Bluetooth compatibility. Whether you’re jamming with tracks at home or streaming music between sets, the FRFR-108 II’s Bluetooth compatibility puts it above your bog-standard FRFR cab.
 
Perfect Partner for Amp Modelers
If you’re new to FRFR amplifiers FRFR stands for “full-range flat-response.” This special type of amplification is very important for amp modeling pedals and pedalboards, as your amplifier needs to sound pure and transparent, so it can deliver a true “amp in the room” sound without coloring it as a traditional guitar amp would. The FRFR-108 MKII is precision-designed to get the most out of your modeler and deliver all the intricacies of your amp and cab emulations, with enough volume to be ready for any stage, rehearsal or jam session.
 
Pure and Powerful Tone
FRFR-108 MKII outputs a massive 2000 watts, which means you have enough headroom for almost any performance or rehearsal. Featuring a specially voiced 8-inch woofer and high-frequency compression driver, the FRFR-108 delivers a precise, full response across the entire frequency range, without any artificial coloration—which is critical to getting the most out of your amp modeler. The FRFR-108 MKII’s performance is exceptional, with max 129dB SPL and 46-22kHz frequency range.
 
FRFR-108 MKII features two combo XLR + 1/4" combo inputs for connecting your amp modeling pedal or pedalboard, each with their own independent volume controls. You can also wirelessly connect a mobile device to the FRFR-108 MKII via Bluetooth, so you can stream music wirelessly at rehearsal or during set breaks. There is also an XLR output for chaining more than one speaker together or sending the signal from your FRFR out to a front of house mix.
 
Adapts to Any Stage or Room
Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other; FRFR-108 MKII has a HPF cut switch to quickly pull those troublesome frequencies out and make sure your tone sits perfect in the mix. Unwanted electrical noise can also be a common problem; FRFR-108 MKII’s ground lift switch can eliminate hums and buzzes resulting from ground loops.
 
Road-Ready Lightweight Design
FRFR-108 MKII is rugged yet lightweight and easy to transport (at 21 lbs / 9.53 kg) making one trip load-ins at the gig or rehearsal space easier than ever. While you can use FRFR-108 MKII in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.

Specifications
 
Amplifier Section
  • Amplifier Type : Solid-State
  • Output Power : 2000 W Peak
  • Channels : 1
  • Master Volume : No
  • Tone Section : Preamp Volume
  • EQ : No
  • Built-In Effects : No
  • Effects Loop : No
  • Inputs : 2x XLR / 1/4" Mic / Line Level
  • Outputs : 1x XLR Mono External Speaker
  • USB I/O : No
  • Wireless : Bluetooth 5.0 *Built-In
  • Mobile App Compatible : No
Speaker Section
Speaker Configuration
  • 1x 8" Cone
  • 1x 1" Cone
Cabinet Type : Angled Closed Mono
Speaker Through/Output : 1x XLR
 
Power
  • AC Input Power : Universal:100 to 240 VAC, 50 / 60 Hz
  • Power Consumption : 1100 W
Physical
  • Dimensions (WxHxD) : 10.1 x 17.2 x 9.6" / 25.7 x 43.7 x 24.4 cm Combo
  • Weight : 21.05 lb / 9.55 kg Combo

ไม่พบข้อมูล