ราคา 135,000.00 บาท
ประกัน 1 ปี
ปรึกษาด้านเทคนิก
Sennheiser Dante-Kit MEG 14-40-L-II
Set the scene for smooth and clearly structured meetings and discussions with the Dante-Kit MEG 14-40-L-II from Sennheiser. Included in the kit is an SL DI 4 XLR four-input Dante preamp and interface, four black MAT 153-S table stands with LED ring buttons, and four MEG 14-40-L-II gooseneck microphones with green light rings.
Equipped with KE 10 capsules, the microphones each feature a directional cardioid polar pattern and yield a frequency response of 50 Hz to 20 kHz for high speech intelligibility. The mics connects to the SL DI 4 XLR four-input Dante preamp and interface for wireless microphone receivers via standard 3-pin XLR cables (available separately). As an analog-to-digital audio converter, the SL DI 4 XLR allows adding analog microphone systems to a Dante system. The SL DI 4 XLR is compatible with all Sennheiser wireless microphone receivers.
Sennheiser SL DI 4 XLR Four Input Dante Preamp & Interface
The SL DI 4 XLR from Sennheiser is a four input Dante preamp and interface for wireless microphone receivers with mic/line inputs to a Dante system. It can be mounted and used almost anywhere close to audio sources and minimizing interference-prone analog wiring in wireless applications.
Featuring four balanced mix/line inputs, each with software-selectable 48V phantom power and different gain levels, the interface provides front-panel LED indicators for showing each channel's gain and phantom power status, which makes for easy troubleshooting.
Plus, it has two network connections to allow Dante Daisy Chaining. This allows you to have multiple SL DI 4 XLR units and use a single Cat-5 home-run connection to a network switch for daisy chaining power. The unit is powered by either an external 12 VDC or any PoE (Power over Ethernet) network switch. All adjustable parameters such as mic/line gain and phantom power are software controlled.
Sennheiser MAT 153-S Table Stand with LED Light Ring Button for 5-Pin XLR Gooseneck Microphone
The black MAT 153-S Table Stand from Sennheiser is a sturdy, wired table stand that provides a stable base for 5-pin XLR gooseneck microphones. It has a user-friendly microphone button with a two-color status display that provides quick visual feedback on whether the microphone is active or muted. The TTL logic output on the underside can be used to activate a camera or media control system. The table stand is powered via a separately available 3-pin XLR cable.
Sennheiser MEG 14-40-L-II Gooseneck Microphone (XLR 5-Pin, Green Light Ring)
The Sennheiser MEG 14-40-L-II is a 15.7” gooseneck microphone designed to provide intelligible speech reproduction for lectures, conferences, meetings, and houses of worship. It features an XLR 5-pin connector, which carries power for its green light ring and audio signal to a preamp. The green light ring indicates when the speaker can take the floor.
Its KE 10 capsule features a directional cardioid polar pattern and yields a frequency response of 50 Hz to 20 kHz. RF shielding protects against interference from wireless devices, giving you a cleaner signal. The flexible 15.7” gooseneck allows precise placement in front of the spokesperson. No batteries are needed to power the MEG 14-40-L-II, it operates on 12 to 48V phantom power.
Features
Input Type | Balanced and RF filtered |
Gain |
0 dB, +15 dB, + 30 dB, +45 dB, software selectable 10 dB pad, software selectable |
Input Impedance | >1.8 kOhms @ any gain |
Maximum Input Levels |
+18 dBu @ 0 dB gain, with pad +8 dBu @ 0 dB gain, no pad -7 dBu @ +15 dB gain, no pad -22 dBu @ +30 dB gain, no pad -36 dBu @ +45 dB gain, no pad |
Phantom Power | +48 V, 10 mAh per input, software selectable |
EIN | -113 dBu |
THD+N | Input signal 3 dB below maximum |
Frequency Response | 20 Hz - 20 kHz |
Type | Standard Ethernet |
Connector | Single RJ-45 |
Cable | Quality: Cat-5 |
Transmission Speed | 100 Mbps |
Daisy Chain |
2 units when powered by 802.3af PoE 3 units when powered by external +12 VDC power supply (Sennheiser NT 12-50CS) |
Power Requirements |
Class 0 802.3af PoE PD compliant +12 VDC |
Power Consumption |
2.7 W (225 mAh) @ +12 VDC, no phantom power 5.5 W (460 mAh) @ +12 VDC, 10 mAh phantom power load per input |
Operating Temperature | 32 to 104°F (0 to 40°C) |
Dimensions (W x H x D) | 8.6 x 1.5 x 4.7" (219 x 38 x 120 mm) |
Weight | 1.7 lb (0.77 kg) |
Package Weight | 2.16 lb |
Box Dimensions (LxWxH) | 12.8 x 7.2 x 2.55" |
Connectors |
Mic In: 5-Pin XLR Female Mic Out: 3-Pin XLR Male Logic: Clip Contact for Logic In (External LED Control), Ground, and Logic Out (Switch Signal) |
Current Consumption | 3.7 mA |
Input/Output Voltage | Logic Out: High-Level Output Voltage >2.4 V, Low-Level Output Voltage Logic In: High-Level Input Voltage >2.0 V, Low-Level Input Voltage |
LED Status Indicator | Light Ring: Red/Green |
Dimensions | Not Specified by Manufacturer |
Weight | Not Specified by Manufacturer |
Transducer | Pre-Polarized Condenser Microphone |
Acoustics | Cardioid |
Frequency Response | 50 Hz to 20 kHz |
Nominal Impedance | |
Maximum Sound Pressure Level (SPL) | 130 dB |
Equivalent Noise Level |
26 dBA Weighted as per CCIR 468-3: 37 dB |
Phantom Power | 12 to 48 V |
Current Consumption | Microphone: 3 mA |
Power | Light Ring: 12 to 30 V |
Current Consumption | Light Ring: 1 to 18 mA |
Connectivity | XLR 5-Pin Male |
Operating Temperature | 32 to 104°F / 0 to 40°C |
Length | 17.7" / 450.0 mm |
Diameter | 0.3" / 8.0 mm |
Weight | 5.2 oz / 147.0 g |
Package Weight | 0.55 lb |
Box Dimensions (LxWxH) | 19.8 x 1.7 x 1.7" |