32x32 Pro Tools | HD I/O With Dual PSUs, 24-bit, 192kHz sampling rates, AES67 compliant
ออดิโอ อินเตอร์เฟส 32 Channel In/Out แบบ HD สำหรับการเชื่อมต่อแบบ Dante Network ใช้กับโปรแกรม DAW อย่าง Pro Tools มีความละเอียดสูงสุดอยู่ที่ 24-bit/192kHz, RedNet HD32R ตัวนี้มาพร้อมกับ Dual power supplies และ Ethernet Redundancy ที่มีระบบ Auto Switchover ในกรณีที่เกิดข้อผิดพลาดในการเชื่อมต่อ
RedNet HD32R is a 1U, Pro Tools | HD™ interface for any Dante™ audio-over-IP network, providing up to 32x32 channels of I/O (16x16 at 192kHz) Featuring network and power supply redundancy, RedNet HD32R is the ideal choice for integrating your Pro Tools HD system into a Dante networked I/O environment in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.
A pair of DigiLink mini connectors allows RedNet HD32R to connect directly to any Pro Tools | HD system whether it's Native, HDX or even a legacy TDM system. Multiple RedNet HD32R units can be on the same Pro Tools system up to the maximum I/O channel count of Pro Tools, and Loop Sync I/O allows seamless integration with other Pro Tools interfaces such as HD I/O and Sync HD I/O.
Features :
-
32x32 Pro Tools | HD I/O for Dante audio-over-IP networks at up to 96kHz (16x16 at 192kHz)
-
Primary and Expansion DigiLink mini connections
-
Up to 24-bit, 192kHz sampling rates
-
AES67 compliant
-
Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
-
Word Clock and Loop Sync I/O for increased flexibility and integration with other Pro Tools | HD hardware
-
Comprehensive remote control and remote signal metering through RedNet Control
-
Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.
DIGITAL PERFORMANCE
-
Supported Sample Rates : 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
-
Clock Sources : Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master
-
External Word Clock Range : Nominal sample rate ±7.5
-
Channel Count : 32x32 at up to 96kHz sampling rate, 16x16 at 176.4 and 192kHz
REAR PANEL CONNECTIVITY
-
Primary Port : 1 x Mini DigiLink
-
Expansion Port : 1 x Mini DigiLink
-
Word Clock Input : 1 x BNC 75O port (switchable termination)
-
Word Clock Output : 1 x BNC 75O port
-
PSU : 2 x IEC Inputs with retaining clips
-
Network : 2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors
FRONT PANEL INDICATORS
-
Primary PSU (A) : Green LED. Illuminates when an AC input is applied and all DC outputs are present
-
Primary PSU (B) : Green LED. Illuminates when an AC input is applied and all DC outputs are present
-
Primary Network : Green LED. Indicates that a network connection is present on primary port when in redundant mode
-
Secondary Network : Green LED. Indicates that a network connection is present on secondary port when in redundant mode
-
Network Locked : Green LED. When unit is network slave, shows valid network lock. When unit is network master
-
Sample Rate : Orange LED for each: 44.1 kHz, 48 kHz, x2, x4
-
Pull Up/Down : Orange LED. Indicates unit is set to operate on a Dante pull up/down domain
-
Signal Indicators : 16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS
-
Clock Source : Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master
NETWORK MODES
-
Redundant : Allows unit to connect two independent networks
-
Switched : Connects both ports to integrated network switch allowing daisy-chaining of device
DIMENSIONS
-
Height : 44.5mm/ 1.75"
-
Width : 482.6mm/ 19"
-
Depth : 263mm/ 10.35"
WEIGHT
POWER
-
Power PSU : 2 x Internal, 100-240V, 50/60Hz, consumption 30VA
HEAT PERFORMANCE
-
Operating Temperature : Operates at up to an ambient temperature of 50 degrees Celcius