TURBOSOUND : MS215 TURBOSOUND

Dual 15" Vented Bandpass Subwoofer for Touring and Installation Applications

 

ตู้ลำโพงแบบซับวูฟเฟอร์แบบไลน์อาร์เรย์  มีลำโพงวูฟเฟอร์ขนาด 15 นิ้ว 2 ตัว 4,000 วัตต์ ค่าความถี่ตอบสนอง 40 Hz - 115 Hz 4,000 วัตต์

 

MANCHESTER MS215

The MS215 is a compact passive dual 15" 4,000 Watt (peak) subwoofer that is ideally suited for a broad range of speech and music sound reinforcement applications in both fixed, portable and touring audio systems. The MS215 is designed to work in conjunction with Lake DSP and Lab Gruppen amplification, providing optimal FOH performance, as well as considerable flexibility to readily adapt to varying venue requirements. Its four point rigging system allows for an array of multiple configurations and all pre-sets are available to download

 

Custom-Engineered Drivers

Turbosound is recognised the world over for designing and building some of the most iconic loudspeakers and subwoofers. We take meticulous care and pride in maintaining that reputation by utilising only drivers designed by ourselves or to our exacting standards.

 

Enclosure Design

The low distortion design utilised in the MS215 reinforces the bass musical instrument frequencies and steep cut-off slopes ensure an effective acoustic transition for use with MV212 line array elements. For low-frequency bass extension, the recommended cabinet ratio consists of one MS215 subwoofer per one MV212 element. For reverse cardioid subwoofer configurations, multiples of three MS215 enclosures are recommended with two front-firing enclosures and one rear-firing enclosure.

 

Construction and Connectivity

An integral suspension system engineered to meet BGV-C1 specifications is provided for suspending or ground stacking MS215 and MV212 elements with a 10:1 safety factor. Designed for speed and simplicity of use, custom-engineered flybars and wheel boards are available as separate accessories. Finished in a ultra hard wearing polyurea black coating, the cabinet is constructed from 18 mm (3.4") birch plywood and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. The rear panel connector plate carries Neutrik speakON* NL4 connectors for input and link connections to additional enclosures.

 

Integration with Lab Gruppen PLM+

With the ever increasing complexity of modern day line array systems. Seamless integration with the Lab Gruppen PLM+ is a prerequisite for the MANCHESTER series from Turbosound. Our engineers have prepared and meticulously designed a series of presets that will allow the user to achieve the maximum system performance and consistency possible. These can be found within the download section.

 

Acoustic Simulation Tools

EASE GLL files are provided for the EASE Focus Acoustics Simulation Software, which is available for free download. This allows accurate calculation of both acoustic coverage and selection of suspension pick point for tilting and aiming the array at the desired angle.

 

Architecture & Engineering Specifications

The loudspeaker shall be of the passive subwoofer type, consisting of two 15" (381 mm) LF drivers. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 40 Hz to 115 Hz and within -10 dB from 35 Hz to 150 Hz. Nominal dispersion shall be “half space.” Maximum amplifier output power shall be 4,000 Watts peak, Peak level at 1 m under half space conditions using  IEC 268-5 pink noise with crest factor 4, with dedicated pre-set, shall be 143 dB. Dimensions: 530 mm high x 810 mm wide x 798 mm deep (20.9 x 31.9 x 31.4”). Net weight: 83 kg (183 lbs). The loudspeaker system shall be the TURBOSOUND MS215. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equalled or exceeded.

Features :