Allen & Heath : DT164-W ALLEN&HEATH

Dante Network Interface Wall Panel, with 16 XLR Microphone Inputs, 4 XLR Line Outputs, and Dual Dante Ports
หมายเลขสินค้า : DT164-W

ราคา 144,840.00 บาท

ราคาปกติ : 181,050.00 บาท

ประหยัดไป 36,210.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

Dante Network Interface Wall Panel, with 16 XLR Microphone Inputs, 4 XLR Line Outputs, and Dual Dante Ports
 
สเต็จบ๊อก(ติดผนัง) สำหรับประมวลผลเสียงหรือเครื่องขยายเสียงสำหรับดิจิตอลมิกเซอร์ AHM-64 audio matrix, SQ, Avantis มีเอาท์พุต 16 XLR 4 line outputs และ Dual Dante ports
 
The DT164-W provides 16 microphone preamps and 4 line outputs in a versatile wall-mount design for permanent installation. The reversible mounting frame allows for in-wall or on-wall mounting. With custom brackets, the unit can be fitted in a standard NEMA box, or mounted in a floor pocket for stage use. The IEC mains power inlet can be replaced with a gland module and screw terminals for fixed installation, and a DC 12V backup supply is also provided.
 
DT164-W offers the acclaimed Allen & Heath preamps, complete with 96kHz converters for best-in-class sound quality over Dante, plus Primary and Secondary ports for daisy-chain or redundancy through secure EtherCon connectors.
 
Up to 16 units can be added to an AHM-64, SQ, Avantis or dLive system when equipped with an SQ Dante or dLive 96kHz Dante card.
 
DT Preamp Control
DT Preamp Control is a Windows / macOS application that allows remote control and firmware update of one or multiple DT168 / DT164-W Dante expanders. For more information on DT Preamp Control and to download the software.


Features :
  • Dante audio expander, 96kHz / 48kHz
  • Wall mount or dip trap installation
  • 16 mic preamps on XLR with Phantom Power status LEDs
  • 4 XLR Line Outs
  • Primary and Secondary Dante ports with locking EtherCon
  • Redundant or Switched mode
  • Direct preamp control from dLive, Avantis and SQ
  • 3 power supply options: 100-230V AC powered on IEC or screw terminal blocks, as well as 12V DC power
  • DC power can be used as redundant power supply
  • Can fit in a standard NEMA box (custom brackets required)
  • Compatible with ACE Backstage 174SLBK stage pocket system
  • AES67 compatible
  • Dante Domain Manager ready

  • Mic/Line XLR Inputs : Balanced XLR, +48V phantom power
  • Mic/Line Preamp : Fully recallable
  • Input Sensitivity : -60 to +15dBu
  • Analog Gain : +5 to +60dB, 1dB steps
  • Pad : -20dB Active PAD
  • Maximum Input Level : +30dBu (PAD in)
  • Input Impedance : >4kΩ (Pad out), >10kΩ (Pad in)
  • Mic EIN : -127dB with 150Ω source
  • Analog XLR Outputs : Balanced, Relay protected
  • Output Impedance : <75Ω
  • Nominal Output : +4dBu = 0dB meter reading
  • Maximum Output Level : +22dBu
  • Residual Output Noise :
    -92dBu (muted, 20-20kHz)
    -90dBu (muted, 20-40kHz)
  • Dante :
    Sample rate: 48kHz or 96kHz
    Bit Depth: 24 Bit
    Gain, Pad, 48v Control: Allen & Heath dLive, Avantis, AHM-64 or SQ system
  • Operating Temperature Range : 0°C to 40°C (32°F to 104°F)
  • Power :
    Mains Voltage Operating Range: 100-240V AC, 50/60Hz
    Mains Power Consumption: 40W max
    DC Input: 12V DC, 3A max
    Dimensions and Weight
    8.25 x 3.5 x 8.25 inches, 7 lbs (210 x 87 x 210 mm, 3.2 kg)