Audio-Technica : AT4050ST Audio-Technica

Stereo Condenser Microphone with Cardioid and Figure-8 Elements, Selectable Stereo and Mid-Side Modes, Low-cut Filter, and 10dB Pad
หมายเลขสินค้า : AT4050ST

ราคา 39,865.00 บาท

ราคาปกติ : 46,900.00 บาท

ประหยัดไป 7,035.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ

  • ฟรี!

    ค่าจัดส่งทั่วไทย

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

Stereo Condenser Microphone with Cardioid and Figure-8 Elements, Selectable Stereo and Mid-Side Modes, Low-cut Filter, and 10dB Pad

 

Offering the realism of a live sound field, the AT4050ST is a side-address condenser with cardioid and figure-of-eight elements configured in a Mid-Side arrangement. This innovative stereo condenser allows sound recordists the choice of selecting a left-right stereo output or choosing discrete Mid-Side signals for later manipulation, a remarkable flexibility. The microphone’s dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range. Its transformerless circuitry virtually eliminates low-frequency distortion.

Features

  • Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement
  • Independent cardioid and figure-of-eight condenser elements
  • Switch selection of Mid-Side mode and two internally matrixed stereo modes
  • Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • Integral 80 Hz high-pass filter switch and 10 dB pad switch
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
  • Custom shock mount provides superior isolation
  • Certified by the METAlliance (Music Engineering and Technology Alliance)

ELEMENT Externally-polarized (DC bias) condenser
POLAR PATTERN Cardioid and Figure-of-eight
FREQUENCY RESPONSE 20-18,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY Stereo 90°: -42 dB (7.9 mV) dB re 1V at 1 Pa 
Stereo 127°: -41 dB (8.9 mV) dB re 1V at 1 Pa 
Mid: -36 dB (15.8 mV) dB re 1V at 1 Pa 
Side: -36 dB (15.8 mV) dB re 1V at 1 Pa
IMPEDANCE 50 ohms
MAXIMUM INPUT SOUND LEVEL Mid and Side: 149 dB SPL, 1 kHz at 1% T.H.D.; 
159 dB SPL, with 10 dB pad (nominal)
NOISE Stereo 90°: 25 dB SPL 
Stereo 127°: 16 dB SPL 
Mid: 15 dB SPL 
Side: 17 dB SPL
DYNAMIC RANGE (typical) Mid: 134 dB, 1 kHz at Max SPL 
Side: 132 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO Stereo 90°: 69 dB, 1 kHz at 1 Pa 
Stereo 127°: 78 dB, 1 kHz at 1 Pa 
Mid: 79 dB, 1 kHz at 1 Pa 
Side: 77 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 48V DC, 6.4 mA typical (both channels total)
SWITCHES 90°, 127°, M-S; 
Flat, roll-off; 
10 dB pad (nominal)
WEIGHT 517 g (18.2 oz)
DIMENSIONS 193.0 mm (7.60") long, 
53.4 mm (2.10") maximum body diameter
OUTPUT CONNECTOR Integral 5-pin XLRM-type
CABLE 5.0 m (16.5') long, 8-conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
ACCESSORIES FURNISHED AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
AUDIO-TECHNICA CASE STYLE R1