ราคา 30,515.00 บาท
ราคาปกติ : 35,900.00 บาท
ประหยัดไป 5,385.00 บาท
ค่าจัดส่งทั่วไทย
ประกัน 1 ปี
ปรึกษาด้านเทคนิก
AT4040 and AT4041 Studio Condenser Microphones with Accessories and Wooden Storage Case
The AT4040SP Studio Pack offers two of Audio-Technica’s renowned 40 Series studio condenser microphones: the AT4040 large-diaphragm side-address condenser and the AT4041 cardioid condenser. Each microphone is transformerless, resulting in exceptional transient response and extremely clean output signals; each is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. A shock mount, stand clamp and windscreen are included, along with a protective wooden carrying case.
AT4040SP Studio Pack includes:
Features
AT4040 Side-address cardioid condenser microphone
ELEMENT | Externally-polarized (DC bias) condenser |
POLAR PATTERN | Cardioid |
FREQUENCY RESPONSE | 20-20,000 Hz |
LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave |
OPEN CIRCUIT SENSITIVITY | -32 dB (25.1 mV) re 1V at 1 Pa |
IMPEDANCE | 100 ohms |
MAXIMUM INPUT SOUND LEVEL |
145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal) |
NOISE | 12 dB SPL |
DYNAMIC RANGE (typical) | 133 dB, 1 kHz at Max SPL |
SIGNAL-TO-NOISE RATIO | 82 dB, 1 kHz at 1 Pa |
PHANTOM POWER REQUIREMENTS | 48V DC, 4.2 mA typical |
SWITCHES |
Flat, roll-off; 10 dB pad (nominal) |
WEIGHT | 12.7 oz (360 g) |
DIMENSIONS |
6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter |
OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
ACCESSORIES FURNISHED | AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case |
AUDIO-TECHNICA CASE STYLE | R1 |
AT4041Cardioid condenser microphone
ELEMENT | Fixed-charge back plate, permanently polarized condenser |
POLAR PATTERN | Cardioid |
FREQUENCY RESPONSE | 20-20,000 Hz |
LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave |
OPEN CIRCUIT SENSITIVITY | -36 dB (15.8 mV), re 1V at 1 Pa |
IMPEDANCE | 100 ohms |
MAXIMUM INPUT SOUND LEVEL | 145 dB SPL, 1 kHz at 1% T.H.D. |
DYNAMIC RANGE (typical) | 121 dB, 1 kHz at Max SPL |
SIGNAL-TO-NOISE RATIO | 70 dB, 1 kHz at 1 Pa |
PHANTOM POWER REQUIREMENTS | 48V DC, 3.2 mA typical |
SWITCH | Flat, roll-off |
WEIGHT | 4.2 oz (120 g) |
DIMENSIONS |
6.28" (159.5 mm) long, 0.83" (21.0 mm) body diameter |
OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
ACCESSORIES FURNISHED | AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case |
AUDIO-TECHNICA CASE STYLE | S1 |