Audio-Technica : AT4021 Audio-Technica

Small-diaphragm Condenser Microphone with Cardioid Pickup Pattern, 10dB Pad, Switchable 80Hz Highpass Filter, and 20Hz-20kHz Frequency Response
หมายเลขสินค้า : AT4021

ราคา 10,795.00 บาท

ราคาปกติ : 12,700.00 บาท

ประหยัดไป 1,905.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ

  • ฟรี!

    ค่าจัดส่งทั่วไทย

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

Small-diaphragm Condenser Microphone with Cardioid Pickup Pattern, 10dB Pad, Switchable 80Hz Highpass Filter, and 20Hz-20kHz Frequency Response

 

Ideal for critical studio and live applications, the low-profile AT4021 offers a flat, extended frequency response, high maximum SPL and wide dynamic range. Its low self-noise is perfectly suited for the most sophisticated recording equipment. Its low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer. The microphone offers outstanding reproduction of low-frequency sounds.


Features

  • Outstanding performance and rugged construction
  • High SPL handling and wide dynamic range
  • Flat, extended frequency response
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • High front-to-back rejection ratio—cardioid polar pattern improves isolation of desired sound source
  • Low self noise perfectly suited for digital recording equipment
  • Exceptional reproduction of low frequency sounds
  • Low-mass element for superb transient response

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY -34 dB (19.9 mV) re 1V at 1 Pa
IMPEDANCE 250 ohms
MAXIMUM INPUT SOUND LEVEL 146 dB SPL, 1 kHz at 1% T.H.D.; 
156 dB SPL, with 10 dB pad (nominal)
NOISE 14 dB SPL
DYNAMIC RANGE (typical) 132 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 80 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 48V DC, 3.0 mA typical
SWITCHES Flat, roll-off; 10 dB pad
WEIGHT 119 g (4.2 oz)
DIMENSIONS 144.0 mm (5.67") long, 
21.0 mm (0.83") maximum body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
AUDIO-TECHNICA CASE STYLE S1