Compact 2 x 30 Watt Matrix Amplifier for Installation Applications
LUCIA 60/2M เป็น Matrix Amplifier ที่สามารถติดตั้งในอาคารได้อย่างสะดวก มีกำลังขับอยู่ที่่ 2 x 30 Watt แบบแยกจากศูนย์กลาง พร้อมด้วยขนาดที่กะทัดรัดและการรับรองจาก Energy Star ให้เสียงที่คุณภาพดี การใช้งานที่ยืดหยุ่นและง่ายดาย สินค้าถูกออกแบบมาเพื่อให้สามารถติดตั้งได้อย่างรวดเร็วและสะดวก และวงจรไฟฟ้าที่ล้ำสมัยภายในตัวสินค้าจะช่วยป้องกันตัว Amplifier และลำโพงที่เชื่อมต่อไว้ด้วยกันกับความเสียหายต่างๆที่อาจเกิดขึ้นจากสัญญาณ clip, ความร้อนสูง, ไฟกระชากและสัญญาณรบกวน
LUCIA 60/2M Incorporates Ease of Install with 2 X 60 W of Decentralized Power in a Compact, Energy Star Compliant Amplifier.
Lab Gruppen’s innovative LUCIA (Localized Utility Compact Intelligent Amplification) brings superior audio performance and extraordinary flexibility to a decentralized approach in AV systems design. Power, processing, control and I/O are conveniently placed exactly where they are needed. In many AV applications requiring consistently outstanding performance, LUCIA offers a logical, cost-efficient and scalable solution that often eliminates the complications and added expense of a centralized equipment room. LUCIA amplifiers incorporate a digital, firmware-controlled front end coupled to a robust, durable and highly efficient Lab Gruppen output stage, all of which make LUCIA the best-sounding and most reliable compact amplifier in its category.
LUCIA 60/2M has been designed and engineered for quick installation and easy setup. The supplied wall-mount bracket enables discreet on-wall location (such as behind video displays), but the ultra-compact form factor also allows easy placement virtually any place – whether next to a projector or integrated into a reception counter, podium & lectern or bar area. All input and output connections are on Euroblock screw terminals (with parallel unbalanced RCA connectors), and level setting is available on front-panel potentiometers. Advanced circuitry protects the amplifier and connected loudspeakers from potential damage caused by clipping, thermal overload, or extreme low line voltage.
Features:
-
Compact matrix amplifier which offers full output power across a range of loads with 2 x 30 W into 8, 4 or 2 Ohms
-
Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning
-
4 x 4 matrix allows mixing and routing all inputs to amplifier output channels and 2 balanced line level outputs
-
Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows* and Mac*
-
Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
-
Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level
-
Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter
-
Optimized presets available for a wide range of loudspeaker models for fast configuration
-
Enhanced Bass Profile for extended LF response with small loudspeakers
-
Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load
-
Efficient Class-D amplifier with low distortion and minimal heat dissipation
-
Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting
-
Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems
-
Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection
-
Universal power supply supports 100 - 240 V AC at 50 or 60 Hz
-
Intelligent fan control for silent operation at idle and at lower output levels
-
Front panel power and fault indication as well as per-channel signal LED and attenuation knob
-
Balanced high quality analog inputs and amplifier outputs on detachable screw terminals
-
Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources
-
Rackmount kit, pole-mount kit and wall panel kits available as accessories
General
-
Number of amplifier channels : 2
-
Max total output all channels driven : 60 W
-
Max output voltage per channel : 21.9 V peak
-
Max output current per channel : 3.9 Arms
Max output power (all channels driven)
-
2 ohms : 30 W
-
4 ohms : 30 W
-
8 ohms : 30 W
-
16 ohms : 15 W
Performance
-
THD 20 Hz - 20 kHz at 1 W into 8 ohms : <0.3%
-
THD at 1 kHz and 1 dB below clipping : <0.2%
-
Signal to Noise Ratio : >95 dBA
-
Channel separation (Crosstalk) at 1 kHz : >60 dBA
-
Frequency Response : 5 Hz - 22 kHz
-
Input impedance : 10 kOhm
-
Common Mode Rejection (CMR) : 40 dB
Gain, Sensitivity and Limiters
-
VPL for 16 ohm mode : 21.9 V peak
-
VPL for 8 ohm mode : 21.9 V peak
-
VPL for 4 ohm mode : 15.5 Vpeak
-
VPL for 2 ohm mode : 11 Vpeak
-
Sensitivity, balanced input : 4 dBu / 1.23 Vrms
-
Sensitivity, RCA input : -2 dBu / 0.62 Vrms
-
Input headroom for clip, balanced 1 : 12 dBu / 3.09 Vrms
-
Input headroom for clip, RCA 1 : 6 dBu / 1.55 Vrms
Connectors and Buttons
-
Output connectors (per ch.) : 2 - pin detachable screw terminals
-
Line-level output connectors (ch. 3 & 4) : 3 - pin detachable screw terminals, electronically balanced
-
GPI (power control input) 2 : 2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain.
-
Input connectors (per ch.) : 3 - pin detachable screw terminals, electronically balanced
-
RS232 : Can be controlled and monitored by third parties via RS232 using both the GPI pins
-
USB : For firmware update and configuration with the Application Browser software
-
Level adjustment (per channel) : Front panel potentiometer, detented from -inf to 0 dB
Processing Features
-
Input processing block 3 : 4 EQ sections per input
-
Mix matrix routing block 3 : 4 in - 4 out mix-matrix controllable from GPI
-
Output processing block 3 : 4 EQ sections per output (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation)
-
Two line level outputs 4 : Each capable of driving 10 LUCIA devices in parallel
-
Latency from any input to any output : User adjustable from 9.15 to 137 ms
Power
-
Nominal voltage : 100 – 240 VAC
-
Operating voltage : 85 – 265 VAC
-
Mains connector : IEC inlet
-
Cooling : One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C
-
Auto mode : The power state is controlled automatically by the audio signal
Others
-
Dimensions : W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”)
-
Weight : 1.9 kg (4.2 lbs)
-
Finish : Black aluminum front and black steel chassis
-
Approvals : CE, CSA, CCC, PSE, FCC, Energy Star