The Royer R-10 is a passive mono ribbon microphone designed for use in the studio and on live stages. Hand-built in our Burbank California factory, the R-10’s sound, and performance are all-Royer and it handles SPLs of up to 160 dB @ 1 kHz. The R-10’s compact size and mounting system allow for flexible, unobtrusive positioning.
The R-10’s 2.5-micron aluminum ribbon element is formed with our patented direct-corrugation process and is protected by a 3-layer windscreen system and internally shock-mounted ribbon transducer. The ribbon transducer is wired for humbucking to reject electromagnetically induced noise.
Royer’s Patented Offset Ribbon Technology
The R-10’s patented offset-ribbon design positions the ribbon element toward the front of the transducer, which allows for high SPL handling on the front (logo) side and the option of a brighter response when recording lower SPL sound sources like acoustic guitar, ukulele and vocals on the backside (3 feet or closer; phase reversed position). For more information on the R-series transducer design
Features
-
High SPL capabilities for electric guitar, brass and other close miking applications
-
Multi-layered wind screen provides superior protection to ribbon element
-
Internally shock-mounted ribbon transducer gives increased durability
-
Passive design and custom transformer minimize high SPL overload
-
Hum-bucking transducer design delivers extremely low residual noise
-
Ribbon element not affected by heat or humidity
-
Absence of high-frequency peaks, “ringing” and phase shifts
-
Equal sensitivity from front or back of the element
Specifications
-
Polar Pattern: Figure-8
-
Generating Element: 2.5-micron aluminum ribbon
-
Magnets: Rare Earth Neodymium (Grade 52)
-
Frequency Response: 30Hz-15,000Hz +/- 3dB
-
Sensitivity: -54dBv (re. 1v/pa)
-
Output Impedance: 100 Ohms
-
Maximum SPL: 135dB @ 50 Hz, 160dB @ 1kHz
-
Recommended Load Impedance: 700 Ohms (or greater)
-
Output Connector: Male XLR 3-pin (Pin 2 Hot)
-
Dimensions: Length including mounting base: 5 7/8 inches (149 mm) Width 1 3/8 inches (35 mm)
-
Weight: 13 oz (368 grams)
-
Shipping Weight: Single: 2.5 lbs, Matched Pair: 4 lbs
-
Accessories: Microphone Holder, Mic Sock, Carrying Case
-
Microphone: Adjustable Swivel Mount (Black)
-
Microphone Warranty: Five Year, First Re-ribbon free in first year