ราคา 64,800.00 บาท
ราคาปกติ : 81,000.00 บาท
ประหยัดไป 16,200.00 บาท
*ราคาไม่รวมภาษีมูลค่าเพิ่ม 7%
ประกัน 1 ปี
ปรึกษาด้านเทคนิก
2-Channel Power Amplifier - 1100 watts/ch at 8Ω, 70V/mono at 5000 watts
The QSC CMX2000Va 2500W Professional Power Amplifier is a 3RU power amplifier designed for live sound reinforcement applications such as for performance halls, houses of worship, sports clubs, gymnasiums, dance venues, pubs, and more.
The amplifier uses a powerful, high-current toroidal transformer with filtering to ensure sufficient energy reserves. This allows the amplifier to handle high-level transients, even when driving 2Ω speaker loads.
The amplifier output sections feature 3-tier class H architecture. The class H output section reduces AC current draw and cuts down on unnecessary heat. Automatic current limiting protects the amplifier from damage until the short is corrected. It also features DC protection systems to prevent loudspeaker damage in the unlikely event of an output transistor failure. DC voltage from the power supply is never passed directly to your speakers, even in case of an output circuit breakdown.
A full complementary output circuit using high-grade linear output devices generates a flat-frequency response with low distortion. SMT (Surface Mount Technology) triples small-signal component density, enabling high power output in a 3RU chassis, less than 16" deep. The output devices are directly mounted to the heat sink to improve thermal coupling and cooling.
The unit has the ability to directly drive 70 and/or 100V distributed loudspeakers. The amplifier may be used in either stereo or mono mode. For installations requiring a transformer isolated output, the CMX has optional accessories to accommodate different applications.
Features
CMX 300Va | CMX 500Va | CMX 800Va | CMX 2000Va | ||
---|---|---|---|---|---|
Stereo Mode (both channels driven) 8Ω FTC 0.1% THD 8Ω EIA 0.1% THD 4Ω FTC 0.1% THD 4Ω EIA 0.5% THD 2Ω EIA 1% THD 70V Direct EIA 1% THD 100V Direct EIA 1% THD FTC: 20 Hz–20 kHz after preconditioning EIA: 1 kHz |
185 W 200 W 280 W 300 W 430 W – – |
260 W 300 W 400 W 500 W 700 W – – |
450 W 500 W 650 W 800 W 1200 W 400 W – |
1050 W 1100 W 1600 W 2000 W (1% THD) 2500 W 2500 W 1000 W |
|
Bridge Mono Mode 8Ω FTC, 0.1% THD 8Ω EIA, 0.1% THD 4Ω EIA, 1% THD 70V Direct Drive EIA, 1% THD 100V Direct Drive EIA, 1% THD FTC: 20 Hz–20 kHz after preconditioning; both channels driven simultaneously EIA: 1 kHz |
530 W 600 W 830 W 600 W – |
800 W 900 W 1400 W 1200 W 600 W |
1300 W 1500 W 2400 W 2000 W 2300 W |
3200 W 3600 W 5000W 5000 W 3600 W |
|
Signal to Noise (20 Hz–20 kHz, 8Ω) | > 100 dB | > 100 dB | > 100 dB | > 100 dB | |
Input Sensitivity into 8Ω | 1.15 V (+3.4 dBu) | 1.14 V (+3.4 dBu) | 1.23 V (+4.0 dBu) | 1.42 V (+5.3 dBu) | |
Max Voltage Gain | 31.6× (30 dB) | 40× (32 dB) | 46× (33 dB) | 64× (36 dB) | |
Output Circuitry | Class AB | Class AB | 2-tier Class H | 3-tier Class H | |
Current Draw (pink noise program) Typical, 1/8 power 4Ω, 120 V Typical, 1/8 power 4Ω, 230 V Severe, 1/3 power 4Ω, 120 V Severe, 1/3 power 4Ω, 230 V |
4.4 A 2.2 A 6.6 A 3.3 A |
5.4 A 2.7 A 9.6 A 4.8 A |
6.3 A 3.2 A 15.6 A 7.8 A |
13.9 A 7 A 26.9 A 13.5 A |
|
Distortion (SMPTE-IM) | < 0.02% | < 0.01% | < 0.01% | < 0.01% | |
Distortion (typical) 20 Hz–20 kHz: 10 dB below rated power 1.0 kHz and below: full rated power |
< 0.03% THD / 4Ω and 8Ω < 0.03% THD / 4Ω and 8Ω |
||||
Frequency Response | 20 Hz–20 kHz: ±1 dB; -3 dB points: 5 Hz and 50 kHz | ||||
Damping Factor (1 kHz and below) | > 300 at 8Ω | ||||
Input Impedance | 10 kΩ unbalanced, 20 kΩ balanced | ||||
Input Clipping | 10 V rms (+22 dBu) | ||||
Cooling | Continuously variable-speed fan, rear-to-front air flow | ||||
Connectors (each channel) |
Input: Active balanced; barrier strip, XLR and ¼" (6.3 mm) – TRS tip and XLR pin 2 positive Output: Detachable terminal block and Neutrik™ Speakon™ |
||||
Controls |
Front: AC switch, Channels 1 & 2 gain knobs Rear: 10-position DIP switch |
||||
Indicators | Power-on: Green LED / Signal: Green LED (1 per channel) / Clip: Red LED (1 per channel) | ||||
Amplifier Protection | Stable into reactive or mismatched loads | ||||
Load Protection | On/off muting, AC coupling (CMX 300Va and CMX 500Va), triac crowbar (CMX 800Va and CMX 2000Va on each channel) | ||||
Power Requirements | 120 or 230 VAC, 50 – 60 Hz | ||||
Dimensions (HWD) 2 RU models 3 RU model (CMX 2000Va) |
3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears |
||||
Weight - Net | 35 lb (15.9 kg) | 40 lb (18.2 kg) | 44.5 lb (20.2 kg) | 75 lb (33.1 kg) | |
Weight - Shipping | 41 lb (18.6 kg) | 46 lb (20.9 kg) | 50.5 lb (23 kg) | 87 lb (37.2 kg) |