PreSonus : Temblor T10 PreSonus

250W Active Studio Subwoofer with 10" Speaker, Balanced XLR Inputs and Outputs, Balanced TRS Inputs, Unbalanced RCA Inputs and Outputs, Lowpass Filter, Phase Switch, Ground Lift, and Level Control

ลำโพง Subwoofer แบบ Active ขนาดดอกลำโพง 10 นิ้ว กำลังขับ 250 วัตต์ แอมป์คลาส AB มีย่านตอบสนองความถี่ตั้งแต่ 20 Hz-200 Hz ค่า SPL สูงสุด 113 dB เหมาะสำหรับห้องบันทึกเสียงระดับมืออาชีพ

Overview

PreSonus aims to inject some serious low end into your studio with the Temblor T10 subwoofer. It's got a 10" reinforced-composition woofer, powered by 250 watts of Class AB power. It's easy to integrate, with filtered pass-throughs for your main speakers. A variable lowpass filter to help you fine-tune its response to your room. Extend the low end and overall response of your studio monitors with the PreSonus Temblor T10 Subwoofer. Sweetwater Sales Engineers are constantly asked, "How to get more accurate monitoring in my studio?" The answer is add a subwoofer. Extend the low end and overall response of your studio monitors with the PreSonus Temblor T10 Subwoofer!

The bottom line is great sound.

To hear what’s really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The Temblor® T8 and T10 let you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.

Customize your system until it’s just right.

The T8 and T10 provide more user controls than any other subwoofer in their class, enabling seamless integration into your listening environment.

Versatile I/O works with any setup.

No other subwoofer anywhere close to the Temblor’s price range offers a comparable selection of inputs and outputs.

Features

Main components

• T10: 10-inch, front-firing, glass-composite low-frequency transducer
• T10: Front-firing, bass-reflex acoustic port

​Controls and filters

• Input gain control (-30 dB to +6 dB, continuously variable)
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Built-in crossover
• Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
• T10: Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
• Polarity invert
• T10: Ground-lift switch

Power and safety

• T10: 250 watt, Class AB amplification
• Internal damping and heat sink
• Integrated rubber feet for stable placement

Inputs and outputs

• T10: Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
• T10: Left and right balanced XLR and ¼” TRS outputs
• T10: XLR subwoofer output for connecting a second T10