ราคา 16,900.00 บาท
High end model with advance hardware, Professional 24bit/96kHz compatible linear PCM recorder |
The rugged TASCAM DR-100mkII offers high-end recording features for musicians and engineers who demand more from their portable recorder. It features four built-in microphones - two cardioid and two omnidirectional - for great sounding recordings. A pair of XLR connectors accept microphone level signals with +48V phantom power for pro-grade condenser microphones, or balanced line-level signals (a new feature on the mkII). The mkII version also adds a S/PDIF digital input, locking connectors and more.
Hardware for hard situations |
![]() |
Locking XLR inputs for balanced output to professional audio equipment are built in to the bottom of the unit. +48V phantom power is available allowing for condenser microphones to be connected. When LINE1 is selected using the switch on the bottom, the XLR input can be used for line level input. In addition to being compatible with +4dBu line level input, 20dB of head room is available. It is also possible to use it as a backup recorder for line level output. The locking connectors help ensure that there are no accidental disconnections on sites. |
![]() |
A large rotary input volume knob is equipped for making fine adjustments to the input level. Fine level settings can be made that are not possible with digital +/- operation. The volume for the left and right channels are independent so level differences can be adjusted. When quick operation is needed, it is possible to make fine level adjustments by direct operation. |
![]() |
Durable aluminum is used for the front and rear of the body. The strong aluminum body gives a luxurious feel and provides excellent durability. |
![]() |
COAXIAL digital input is possible when the standard conversion cable is connected to the REMOTE/DIGITAL IN connector on the side panel and DIGITAL IN is selected from the Menu. It is compatible with IEC60958-3 (S/PDIF) format. |
![]() |
Multiple mechanical switches can be found on the body allowing you to feel secure about operations, which is different from using menu operations. This ensures quick and secure operation. |
![]() |
The headphone output and line level output connectors are independent, which are integrated on most linear PCM/IC recorders. Because each has optimal circuitry, a high-quality line level output is achieved that is not possible with an integrated connector. |
Advanced audio circuit with high-quality sound design |
![]() |
Because a balanced microphone pre-amplifier circuit with discrete parts is used, the S/N ratio is greatly improved over the previous DR-100 when H is selected for MIC GAIN. For the whole circuit, a high S/N ratio of 92dB and a THD+N of 0.01% (max.) are achieved. |
![]() |
An Audio4pro™ IC* by AKM with a S/N ratio in excess of 100dB is used for the AD/DA. High-quality sound is achieved by using the right ADC that digitizes the high-quality sound from the high-quality microphone and analog circuit. * Audio4pro™ is an IC developed by AKM for professional digital audio equipment such as mixers used in recording studios. |
Improvements to the popular DR-100 based on user feedback |
Features |
Recording Media | SD card(64MB to 2GB), SDHC card(4GB to 32GB) |
File System | FAT16/32 |
File Format | WAV, MP3 |
Recording/Playback Format | |
WAV | 44.1/48/96 (HS mode) kHz, 16/24-bit |
Sampling frequency | |
STD mode | 44.1k / 48k Hz |
HS node | 44.1k / 48k / 96k Hz |
Quantization bit rate | 16bit / 24bit |
MP3 | |
Sampling frequency | 44.1k / 48k Hz |
Recording bit rate | 32k / 64k / 96k / 128k / 192k / 256k / 320k bps |
Playback bit rate | 32kbps to 320kbps |
Number of Channels | 2 channels(stereo) |
Playback Speed Control (VSA) | -50% to +16%(1% step) |
Analog Inputs | |
MIC/LINE 1 IN | Phantom Power Compatible |
Connecter | XLR-3-31 (1 : GND, 2 : HOT, 3 : COLD |
MIC | Switch is set to MIC |
Input Impendance | 2.1k ohms |
Nominal Input Level | -14dBu |
Maximum Input Level | +2dBu |
LINE 1 | Switch is set to LINE |
Input Impendance | 2.5k ohms |
Nominal Input Level | +4dBu |
Maximum Input Level | +24dBu |
LINE 2 IN | |
Connetor | 3.5mm(1/8") Stereo mini jack |
Input Impedance | 22 k ohms or more |
Nominal Input Level | -10dBV |
Maximum Input Level | +6dBV |
Analog Output | |
LINE OUT (XLR LINE IN) | |
Connector | 3.5mm(1/8") Stereo mini jack |
Output Impendance | 200 ohms |
Nominal Output Level | -14dBV |
Maximum Output Level | +6dBV |
Digital Input | |
Connector | 2.5mm(3/32") TRS jack |
Format | IEC60958-3(S/PDIF) |
PHONES | |
Connector | 3.5mm(1/8") Stereo mini jack |
Maximum Output | 25mW+25mW(32ohms loaded) |
USB | |
Connector | Mini-B type |
Format | USB2.0 HIGH SPEED mass storage class |
REMOTE | |
Connector | 2.5mm(3/32") TRS jack |
Format | Exclusive TASCAM RC-10/RC-3F |
Built-in Speaker | 0.4W (mono) |
Power Supply |
Exclusive Li-ion battery (BP-L2), 2 AA batteries, Exclusive AC adapter (PS-P520), Exclusive external battery pack (BP-6AA) |
Power Consumption | 4W(MAX) |
Battery operation time (Recording) |
|
Li-ion battery (BP-L2) |
|
Alkaline batteries (EVOLTA) |
|
Ni-MH batteries (eneloop) |
|
Dimensions |
3.15(W)×6.024(H)×1.378(D) inch 80(W)×153(H)×35(D) mm |
Weight (without batteries) |
0.64lb 290g |
Operating Temerature | 0˚C to 4˚C |
Included Accessories | 2GB SD card, Exclusive Li-ion battery (BP-L2), USB connection cable, Exclusive soft case, Exclusive windsock, Wireless remote control (RC-10), Coin cell battery for confirming remote control operation, Wired remote control adapter, Wired remote control cable, Digital input conversion cable, Owner's Manual, Warranty card |
Audio Performance | |
Frequency response |
20 to 20kHz +1/-3dB(EXT IN to LINE OUT, Fs44.1kHz, JEITA) 20 to 22kHz +1/-3dB (EXT IN to LINE OUT, Fs48kHz, JEITA) 20 to 40kHz +1/-3dB EXT IN to LINE OUT, Fs96kHz, JEITA) |
Distortion | 0.01% or less(XLR LINE 1 IN to LINE OUT, Fs44.1kHz, +24dBu input, JEITA) |
S/N Ratio | 92dB or more(XLR LINE 1 IN to LINE OUT, Fs44.1kHz, +24dBu input, JEITA) |
Computer Requirements | |
Windows | |
OS | Windows XP, Windows Vista, Windows 7, Windows 8 |
CPU type/speed | Pentium 300MHz or faster |
Memory | 128MB or more |
USB | USB2.0 |
Macintosh | |
OS | Mac OS X Jaguar(10.2), Mac OS X Panther(10.3), Mac OS X Tiger(10.4), Mac OS X Leopard(10.5), Mac OS X Snow Leopard(10.6), OS X Lion(10.7), OS X Mountain Lion(10.8) |
CPU/Clock | Power PC, iMac, G3, G4, G5 266MHz or faster |
memory | 64MB or more |
USB | USB2.0 |