TASCAM : AK-DR10CR TASCAM

Microphone Jack Adapter for DR-10C Series to use with Sony/RAMSA Mics
หมายเลขสินค้า : AK-DR10CR

ราคา 6,100.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ


แชร์ไปยัง :

Microphone Jack Adapter for DR-10C Series to use with Sony/RAMSA Mics

 

The Tascam AK-DR10CR adapter connects to your DR-10C Series Recorder and allows you to plug your Sony and Ramsa microphones in through their own 4 pin Hirose connectors. This is the perfect accessory to save you re-terminating your existing mics for your new equipment.

Recording media microSD card(64MB to 2GB), 
microSDHC card(4GB to 32GB)
Media discharging Push-Push type (Guard cover mounted)
Recording format WAV(BWF)
Sampling frequency 48kHz
Quantization bit rate 24bit
Number of channels 1-channel (Mono)
Analog audio Inputs  
Connector More info for Pin Assign, please click here
DR-10CS Compatible with SENNHEISER
3.5mm(1/8") TRS jack with screw lock
DR-10CH
AK-DR10CH
Compatible with SHURE
Mini XLR 4pin, Male (TA4M adapter)
AK-DR10CR Compatible with SONY
Hirose 4pin Female KMC-9BPD-4S (SMC9-4S adapter)
Compatible with RAMSA 
Hirose 4pin Female KMC-9BPD-4S (KMC-9BRF-4S adapter)

* Please utilize the slide switch for SONY / RAMSA selection.
MIC input gain LOW / MID / HIGH
Input impedance 32kohm or more
PHONES  
Connector 3.5mm(1/8") stereo mini jack (DUAL MONO)
USB  
Connector Micro-B type 4pin
Protocol USB2.0 HIGH SPEED mass storage class
Power 1 AAA battery (Alkaline battery/ Ni-MH battery / Lithium battery), 
USB bus power
Power consumption 0.45W
Battery operation time WAV,24 bit / 48kHz Rec, without headphones, limiter : OFF , Dual Rec : OFF , JEITA Rec
Alkaline battery (EVOLTA) Approx 10 hours
Ni-MH battery (eneloop) Approx 8 hours
lithium battery (Energizer ULTIMATE LITHIUM) Approx 15.5 hours
Battery (RTC) Lithium × 1(built in with soldering)
Dimensions  
DR-10CS / DR-10CH 52(W) × 55.6(H) × 24.4(D) mm
2.0(W) × 2.2(H) × 1.0(D) inch
AK-DR10CH 49.2(W) × 20.9(H) × 19.2(D) mm
1.9(W) × 0.8(H) × 0.8(D) inch
AK-DR10CR 49.2(W) × 20.9(H) × 21.5(D) mm
1.9(W) × 0.8(H) × 0.8(D) inch
Weight  
DR-10CS / DR-10CH 63g (including battery) / 51g (without battery)
AK-DR10CH 16.3g
AK-DR10CR 16g
Operating temperature 0˚C to 40˚C
Accessories  
DR-10CS / DR-10CH USB cable,Connection cable, Carrying case, Clip, Belt, Owner's Manual (including warranty)
AK-DR10CH / AK-DR10CR Connection cable, Spare screws × 3

 

Audio performance
Frequency response 20Hz to 22kHz +1/-2dB (IN to PHONES)

 

Computer compatibility
Windows
OS Windows 7, Windows 8, Windows 8.1
Macintosh
OS OS X Mountain Lion(V10.8), OS X Mavericks(10.9)

 

DR-10C Series Pin Assign

 

DR-10CS
SENNHEISER Compatibility   
Tip : Mic  
Ring: Line IN-OUT Connection. (Not available for DR-10C)
Sleeve: GND  

 

DR-10CH / AK-DR10CH
SHURE Compatibility   
1: Ground  
2: +5VDC Bias When use the DR-10C with a mic, select "MIC BIAS" under Menu, and switch to "ON" for the mic bias supply from the unit itself.
3: Audio  
4: Active Load Two-way IN-OUT connection. Internal Audio is available in the DR-10C.

 

AK-DR10CR


* Please utilize the slide switch for SONY / RAMSA selection.
SONY Compatibility   
1: +5V When use the DR-10C with a mic, select "MIC BIAS" under Menu, and switch to "ON" for the mic bias supply from the unit itself.
2: HOT Two-way IN-OUT connection. Not available in the DR-10C.
3: COLD  
4: GND  

RAMSA Compatibility   
1: HOT  
2: HOT Two-way IN-OUT connection. it does not support 2pin on a mic.
3: +3.5V When use the DR-10C with a mic, select "MIC BIAS" under Menu, and switch to "ON" for the mic bias supply from the unit itself.
4: GND  

 

DR-10C Series Tested Transmitter and Lavalier Microphone List

Last update:May 25, 2015
DR-10CS
SENNHEISER
Transmitter SK 100, SK 300
Lavalier Microphone ME 2, ME 4, MKE 1-ew, MKE 2-ew

 

DR-10CH, AK-DR10CH
SHURE
Transmitter UR1M, ULX1, SLX1, FP1
Lavalier Microphone WL183, WL184, WL185, WL93

 

AK-DR10CR
SONY
Transmitter WRT-850
Lavalier Microphone ECM-77BC
RAMSA
Transmitter WX-TB841, WX-TB840, WX-DT130
Lavalier Microphone WM-LA02, WM-LA004