SHURE : PGDMK6-XLR SHURE

SHURE PG52

Microphone Type :

• Dynamic (moving coil)

Polar Pattern :

• Cardioid (unidirectional)

Frequency Response :

• 30 to 13,000 Hz

Polarity :

• Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector

Output Impedance (at 1000 Hz) :

• 300 ohms

Sensitivity (at 1000 Hz) :

• -55 dBV/Pa, (1.8 mV), 1 Pascal=94 dB SPL

Electromagnetic Hum Sensitivity :

• 25 dB equivalent SPL in a 1 millioersted field (60 Hz)

Connector :

• 3-pin professional audio connector (male XLR type)

Case :

• Die cast metal housing, black matte finish; hardened silver colored, tapered steel mesh grille; built-in locking stand adapter

Environmental Conditions :

• This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%.

Weight :

• Net: 470 g (16.8 oz)
• Packaged: 1053 g (2 lbs 5 oz)

SHURE PG56

Microphone Type :

• Dynamic (moving coil)

Polar Pattern :

• Cardioid (unidirectional)

Frequency Response :

• 50 to 15,000 Hz

Polarity :

• Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector

Output Impedance (at 1000 Hz) :  

• 200 ohms

Sensitivity (at 1000 Hz) :

• -56 dBV/Pa, (1.6 mV), 1 Pascal=94 dB SPL

Electromagnetic Hum Sensitivity :

• 26 dB equivalent SPL in a 1 millioersted field (60 Hz)

Connector :

• 3-pin professional audio connector (male XLR type)

Case :

• Die cast metal housing, black matte finish; hardened silver colored, tapered steel mesh grille; built-in locking stand adapter

Environmental Conditions :

• This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%.

Weight :

• Net: 323 g (11.4 oz)
• Packaged: 935 g (2 lb 1 oz)

SHURE PG81

Microphone Type :

• Condenser (electret bias)

Polar Pattern :

• Cardioid (unidirectional), symmetrical about axis

Frequency Response :

• 40 to 18,000 Hz

Polarity :

• Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector

Output Impedance (at 1000 Hz) :

• 600 ohms

Sensitivity (at 1000 Hz) :

• -48 dBV/Pa, (4.0 mV), 1 Pascal = 94 dB SPL

Electromagnetic Hum Sensitivity :

• -7 dB equivalent SPL in a 1 millioersted field (60 Hz)

Recommended Input Load Impedance :

• 800 ohms minimum

Output Clipping Level (1 kHz, 1 % THD) :

• 2000 ohm load
• 13 dBV (0.22 V) (phantom)
• -17 dBV (0.14 V) (battery

Maximum SPL :

• 2000 ohm load: 131 dB (phantom), 127 dB (battery)

Self-Noise (Equivalent SPL) :

• 20 dB typical, A-weighted

Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level)

• 111 dB (phantom); 107 dB (battery)

Signal-to-Noise Ratio :

• 68 dB (IEC 651)* at 94 dB SPL

Power : 

• Power Phantom Power
  • Supply Voltage: 11 to 52 Vdc
  • Current Drain: 2.0 mA max at 52 Vdc
  • Maximum Exteral Voltage Applied to Pins 2 and 3 with respect to Pin 1: +52 Vdc
  • Reverse polarity protected to: 100 Vdc
• Battery Power
  • Recommended: 1.5 V alkaline AA size (NEDA 15A)
  • Life: up to 10,000 hour

Switch :

• Built-in On/Off switch

Case :

• Steel and brass construction with black painted finish

Environmental Conditions :

• This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%.

Electromagnetic Hum Sensitivity :

• -7 dB equivalent SPL in a 1 millioersted field (60 Hz)

Weight :

• Net: 250 g (8.8 oz) less battery
• Packaged: 880 g (1 lb 15 oz)

PGDMK6-XLR Specs