QSC : WL2102-w QSC

Dual 10
หมายเลขสินค้า : WL2102-w

ราคา 232,900.00 บาท

ราคาปกติ : 274,000.00 บาท

ประหยัดไป 41,100.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ


แชร์ไปยัง :

Dual 10" Line Array Speaker System

 

The QSC WideLine is a full range line array loudspeaker system designed for use in a wide variety of venues, ranging from ballrooms, theaters and nightclubs to concert halls, houses of worship and arenas. The WideLine features an open, natural sound quality and exceptionally wide 140° horizontal coverage pattern - the widest of any line array system currently available.

 

The WideLine's 16 ohm per transducer lowfrequency impedance optimizes allocation of amplifier channels. In biamp mode the LF/MF sections of up to four enclosures can be powered by one amplifier channel operating into a two ohm load. In triamp mode the LF and MF sections of up to eight enclosures can be powered by a single two channel amplifier.

 

The enclosure of the WL2102-w (pictured) is constructed of industry standard birch plywood resulting in a slight increase in weight; 83 lbs/37.7 kg vs. 70 lbs/31.8 kg for the WL2102, at a substantial cost savings for more price sensitive applications where the ultra light weight and extreme weather resistance of the cored composite enclosure are not required. The mechanical design allows composite and plywood enclosures to be arrayed together.

 

Wideline features a unique 3-point suspension system allowing construction of arrays of up to 24 enclosures (5:1 design factor). A 12 enclosure hang will maintain a 10:1 design factor which may be dictated by local regulations and practices. Vertical splay angles between adjacent enclosures are adjustable in one degree increments from zero to ten degrees. All hardware required to construct an array is permanently attached to the enclosure; there are no loose parts to misplace.

Features

  • Patented* multiple aperture diffraction slot waveguide provides exceptionally wide horizontal coverage (140°) and a near ideal vertical line source
  • Exceptionally high output capability in a very compact form factor
  • Biamp or triamp design
  • Dual 10" long-excursion, high-power, low-frequency transducers
  • Single 3" diaphragm neodymium compression driver
  • WL2102-w Birch ply construction offers reasonable weight (83 lb, 37.7 kg) at a lower cost
  • Fully captive hardware design incorporates all components necessary for box to box rigging

SPECIFICATIONS
WL2102-w (Wood)
Configuration Biamp or Triamp mode
Transducers
  High Frequency Transducer
  Low Frequency Transducer

1.4" exit, 3" titanium diaphragm, neodymium magnet assembly
2 × 400 W, 16 ohm 10" woofer, 3" voice coil, ceramic magnet assembly
Frequency Response (±3 dB)
Frequency Response (-10 dB) 
55 Hz to 18 kHz (with recommended DSP processing)
48 Hz to 20 kHz (with recommended DSP processing)
Nominal Impedance HF: 16 ohms 
LF biamp mode: 8 ohms 
LF triamp mode: 16 ohms (× 2)
Continuous Power Capacity HF: 80 W (2 hours, AES1984-2 method, 1 to 10 kHz)
LF biamp mode: 600 W (2 hours, AES1984-2 method, 80 to 800 Hz)
LF triamp mode: 400 W (×2) (2 hours, AES1984-2 method, 80 to 800 Hz)
Max Recommended Power HF: 300 W @ 16Ω
LF bi-amp mode: 1400 W @ 8Ω
LF tri-amp mode: 700 W @ 16Ω (x 2)
Sensitivity (1 W at 1 m) HF: 107.5 dB (single cabinet measured in free space.)
LF: 98 dB (single cabinet measured in free space. LF drivers connected in parallel)
Maximum Output (SPL at 1 m)
  Continuous:
  Peak:

HF: 127 dB / LF: 127 dB
HF: 133 dB / LF: 133 dB
Nominal Coverage Horizontal: 140°
Vertical: Dependent on number of elements used
Enclosure
Cabinet Type Ported, trapezoidal
Material Baltic birch plywood
Finish Black or white texture coat
Grille Perforated, formed powder coated steel
Connectors 2 x Neutrik Speakon® NL8 in parallel
Pinout
Pins Biamp Triamp
1+/1- LF MF
2+/2- NC LF
3+/3- NC NC
4+/4- HF HF
Attachment Points Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 2 ° to 10° and 0°
Weight 83 lb (37.7 kg) net
91 lb (41.4 kg) shipping
Dimensions (HxWxD)  10.75" × 27.5" × 20.25" 
(27.3 cm × 69.85 cm × 51.43 cm)