Radial : JDI Radial

1-Channel Passive Instrument Mno Direct Box with Jensen Transformer and Rugged I-beam Construction
หมายเลขสินค้า : JDI

ราคา 9,000.00 บาท



เลือกจำนวน :

เลือกสี : สีเขียว

  • สีเขียว


แชร์ไปยัง :

1-Channel Passive Instrument Mno Direct Box with Jensen Transformer and Rugged I-beam Construction
 

The Radial JDI is a passive direct box designed to handle extreme signal levels without distortion of any kind. Unlike an active DI that is limited by the buffering amplifier’s rail voltage, the JDI employs a Jensen audio transformer as the engine. Jensen transformers are legendary in their ability to gracefully handle transients while delivering a smooth, warm sounding Bessel curve, reminiscent of the finest vintage gear. Ruler flat from 10Hz to 40kHz and with virtually zero phase deviation, the JDI delivers the natural, pure sound of the instrument without artifact.

 

The 100% passive circuitry inside the JDI is incredibly efficient. The transformer performs both high-to-low impedance conversion and signal balancing at the same time with minimal loading and does so without any power whatsoever. The transformer also introduces a magnetic bridge that passes signal while rejecting stray DC voltage. This makes the JDI particularly adept at eliminating hum and buzz caused by ground loops.

 

Features include input and throughput ¼” connectors, -15dB input pad, ground lift, and 180º degree polarity reverse to help phase align the instrument with the PA. A secondary circuit is added for direct interfacing with high output devices such as guitar or bass amp loudspeakers plus a unique merge function allows stereo sources such as keyboards to be summed mono, saving valuable input channels.

 

Built tough to handle the abuse of live touring, the JDI features a 14-gauge steel I-beam inner frame and a unique book-end outer shell. The innovative design eliminates stress on the PCB, reducing opportunity for solder joints to go ‘cold’ while the outer shell creates a protective zone around the switches and connectors. The steel casing resists noise-causing electromagnetic pollution and the transformer’s sensitive inner workings are further protected from magnetic fields with a MuMETAL® can. This ensures the signal transfer is quiet and free from hum.

 

These combined features have made the Radial JDI the most popular passive direct box in professional touring and an excellent choice for instrument interface in the studio!

 

The Radial JDI… the world's finest passive direct box.

 


Features

  • Welded I-beam construction makes it impossible to torque the PC board. This virtually eliminates cold solder joints - the No.1 cause of system failure in the field.
  • An innovative 'slide-in-place' XLR trace makes it possible to use I-Beam girder construction.
  • Jensen transformer for distortion-free performance.
  • A military-grade PC board is employed for maximum wear and tear in abusive environments. Welded steel standoffs ensure the PC board will not shift.
  • A -15dB pad allows super hot inputs such as that from a CD player to be connected and balanced for long runs.
  • The Merge function turns the input and thru into a passive mixer to sum stereo feeds to mono at the XLR output. This saves valuable inputs on the mixer!
  • The input connects to the instrument.
  • The thru-put is connected to the instrument amplifier. The JDI has a high input impedance to reduce loading.
  • Book-end design creates a protective zone around the switches & connectors for best protection!
  • A heavy-duty baked enamel finish for excellent durability and great looks for years! 100% 14-gauge steel construction.
  • The XLR balanced mic level output provides 100% isolation for runs to 1000 feet without appreciable noise.
  • A polarity reverse switch flips the polarity from the AES standard Pin-2 to Pin-3 on the XLR and is used when combining sounds that may be out of phase.
  • The ground-lift disconnects the ground path to the transformer at the XLR output. This is used when a ground path is made at the input side such as with a keyboard.
  • The parallel speaker interface option introduces a second -30dB pad with band-pass filter to emulate a 12" guitar speaker.
  • A no-slip full bottom pad reduces mechanical vibration, improves electrical isolation and keeps the JDI from moving around on busy stages!

Type Passive DI
Channels 1
Inputs 1 x 1/4"
Outputs 1 x XLR, 1 x TS thru
Height 2"
Width 3.5"
Depth 5.5"
Weight 2.2 lbs.
Manufacturer Part Number R800 1010