TASCAM TM-90BM Boundary Condenser Microphone.
The Tascam TM-90BM is a boundary condenser microphone designed to deliver low-profile vocal and instrument reproduction for speakers, musicians, and audio engineers in conference and office rooms, recording studios, and live stage applications. Its half-supercardioid polar pattern aids in rejection of off-axis sounds and a maximum SPL of 140 dB allows distortion-free capture of loud sources such as drums.
The 50 Hz to 18 kHz frequency response is well-suited to speech and many musical instruments due to its natural attenuation of sub-low frequencies. Further control of the low end is provided via a 3-position Bass Tilt switch. The supplied patch cable, which is terminated with an XLR 3-pin male jack, allows for easy connection to a mixer or microphone preamp. Mic preamps that supply 9 to 52V phantom power are sufficient for operation of the mic.
The TM-90BM ships with a hardshell carry case for safe transport between gigs.
Features :
-
For Meetings, Podcasts, and Studio Work
-
Half-Supercardioid Polar Pattern
-
50 Hz to 18 kHz Frequency Response
-
9 to 52V Phantom Power
-
Suitable for tabletop, wall, or floor placement
-
Low-profile design and matte black finish are ideal for on-camera use
-
Half-supercardioid polar pattern reduces pickup of ambient sound from the rear of the mic
-
50 Hz to 18 kHz frequency response attenuates low-frequency rumble
-
Works with 9 to 52V phantom power
-
Dedicated 9.6' patch cable with XLR 3-pin male jack
-
High maximum SPL of 140 dB enables handling of high-level sound sources
-
3-position bass switch offers -5 dB cut, flat, and +5 dB boost settings at 100 Hz
-
Includes hardshell carry case for safe and simple transport
Specs :
-
Sound Field Mono
-
Operating Principle Pressure Gradient
-
Transducer Electret Condenser
-
Tube No
-
Polar Pattern Unidirectional
-
Frequency Range 50 Hz to 18 kHz
-
Signal to Noise Ratio 68 dB
-
Maximum SPL 140 dB SPL RMS
-
Pad None
-
Impedance 150 Ohms
-
Load Impedance 1 kOhms
-
Sensitivity -35 dB at 1 kHz
-
Low-Cut Filter @ 100 Hz
General
-
Output Connectors 1 x 3-Pin XLR
-
Operating Voltage 9 to 52 V
-
Dimensions (W x H x D) 6.7 x 0.9 x 3.2" / 170.0 x 24.0 x 81.5 mm
-
Weight 9.17 oz / 260 g
Packaging Info
-
Package Weight 1.75 lb
-
Box Dimensions (LxWxH) 10.2 x 7.6 x 3"