Behringer : NX3000 Behringer

2-channel Power Amplifier, 900W Peak/ch at 4 ohms, with Stereo Crossover, SmartSense Loudspeaker Impedance Compensation, Zero-attack Limiters, Thermal Overload Protection, Twist-lock Speaker Connectors, and LED Meters

หมายเลขสินค้า : NX3000

ราคา 14,000^.00 บาท

สินค้าหมดชั่วคราว
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีดำ

ฟรี!

ประกัน 1 ปี
ฟรี!

ปรึกษาด้านเทคนิก

Behringer NX3000 Power Amplifier.

เครื่องขยายเสียง เพาเวอร์แอมป์ Behringer NX3000 เป็นเพาเวอร์แอมป์แบบ Class-D Technology มีกำลังขับ 2 x 1500 วัตต์ into 2 Ohms , 2 x 900 วัตต์ into 4 Ohms , 2 x 440 วัตต์ into 8 Ohms, Built-In Stereo Crossover, ตอบสนองความถี่ 20 Hz to 20 kHz, Balanced XLR-1/4″ Combo Inputs

Lightweight and Packed with Features

The Behringer NX3000 packs an impressive amount of power into a lightweight, cool-running unit. This power amplifier delivers 900 watts/channel into 4 ohms, 1,500 watts/channel into 2 ohms, or a whopping 3,000 watts into 4 ohms bridged, so you'll have plenty of headroom to work with. Experience low noise, superior transient response, and low power consumption, thanks to an efficient switch-mode power supply. Benefit from a linear frequency response at any speaker load, by virtue of the NX3000's SmartSense loudspeaker impedance compensation. Beyond that, Zero-attack limiters supply maximum output with reliable overload protection. The NX3000 comes complete with a built-in stereo crossover, reliable twist-lock speaker connectors, and precise 4-segment LED metering.

Lightweight and efficient Class D amplifier technology

Thanks to revolutionary Class D technology with "near-zero" thermal buildup, the lightweight NX3000 runs very cool, no more massive heat sinks or toroid transformers. We've been impressed with the punch and clarity of this Class D power amp at Sweetwater, and we're sure your band will be too.

Linear frequency response at any speaker load

The NX3000 punches well above its weight. Behringer's SmartSense Technology yields a linear frequency response at any speaker load impedance. On top of that, the NX3000's impressive damping factor offers superior amplifier control over your speakers, ensuring top-notch sound reproduction. When combined with quality loudspeakers, the NX3000 yields powerful, dynamic bass and ultra-smooth high-frequencies.

Designed for exceptional ease-of-use

Operating the NX3000 is dead simple. Benefit from at-a-glance confirmation of your system's vital signs, by way of the NX3000's simple front-panel controls and indicators. Positive-detent gain controls with signal level LEDs on each channel make gain-staging a piece of cake. Rear-panel combo XLR and 1/4" TRS input connectors ensure compatibility with just about any source. Reliable twist-lock speaker connectors prevent unwanted "unplugging" incidents. You also get switchable dual mono, stereo, and mono bridge modes, along with an easy-to-use stereo crossover.

Features :

Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 7.7 lbs / 3.5 kg
Ultimate reliability through revolutionary cool-running High-Density Class-D technology with “near-zero” thermal buildup
Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
Built-in stereo crossover with low-cut, high-cut and full range mode
SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance
“Zero-Attack” limiters offer maximum output level with reliable overload protection
Detented gain controls for precise level setting
Precise 4-segment Signal and Limit LEDs to monitor performance
XLR and 1/4” TRS combination input connectors for compatibility with any source
Professional twist-lock speaker connectors for ultimate reliability
Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
“Back-to-front” ventilation system prevents thermal buildup for reliable operation
Designed and engineered in Germany

Specs :

Maximum Output Power	2 x 1500 W into 2 Ohms 2 x 900 W into 4 Ohms 2 x 440 W into 8 Ohms 3000 W into 4 Ohms (bridge mode) 1500 W into 8 Ohms (bridge mode)
Type	High-density Class-D technology
Modes of Operation	Stereo, dual-mono, and mono bridge modes (switchable)
Crossover Adjustment	Full range, low-cut, and high-cut modes
Input Sensitivity	0.775 V (0 dBu), for rated power into 4 Ohms
Distortion	<0.05%
Frequency Response	20 Hz to 20 kHz, +0 / -1 dB
Damping Factor	>145 at 8 Ohms
Input Connections	2 x XLR-1/4″ / 6.3 mm combo connectors (L/R) Accepts balanced and unbalanced sources
Signal to Noise	>100 dB
Output Connectors	2 x twist-lock speaker sockets (L/R)
Controls Front Panel	Channel A gain knob Channel B gain knob Power switch
Indicators	Power: Amber LED Limit: 0 dB LED (per channel) Signal: -40, -6, -3 dB LEDs (per channel) Protect: Red LED (per channel)
Cooling	Continuously variable speed fan Back-to-front air flow
Amplifier Protection	Thermal and DC protection Stable into reactive or mismatched loads
Overload Protection	On/off muting, DC-fault power supply shutdown
Power Supply	100-120 VAC, 50/60 Hz
Fuse	T 10 A H, 250 V
Power Consumption	350 W, at 2 Ohms, 1/8 rated power
Power Connector	Standard IEC receptacle
Dimensions	3.7 x 19.0 x 9.1″ / 94 x 483 x 231 mm (including 0.19″ / 5 mm rubber feet)
Weight	7.7 lb / 3.5 kg