Behringer : NX6000 Behringer

2-channel Power Amplifier, 3,000W Peak/ch at 4 ohms, with Stereo Crossover, SmartSense Loudspeaker Impedance Compensation, Zero-attack Limiters, Thermal Overload Protection, Twist-lock Speaker Connectors, and LED Meters

หมายเลขสินค้า : NX6000

ราคา 22,500^.00 บาท

ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีดำ

ฟรี!

ประกัน 1 ปี
ฟรี!

ปรึกษาด้านเทคนิก

Behringer NX6000 Power Amplifier.

เครื่องขยายเสียง เพาเวอร์แอมป์ Behringer NX6000 เป็นเพาเวอร์แอมป์แบบ Class-D Technology มีกำลังขับ 2 x 3000 วัตต์ into 4 Ohms , 2 x 1600 วัตต์ into 8 Ohms, Built-In Stereo Crossover, ตอบสนองความถี่ 20 Hz to 20 kHz, Balanced XLR-1/4″ Combo Inputs

Lightweight and Packed with Features

The Behringer NX6000 packs an impressive amount of power into a lightweight, cool-running unit. This power amplifier delivers 3,000 watts/channel into 4 ohms or 1,600 watts/channel into 8 ohms, so you'll have plenty of headroom to work with. Experience low noise, superior transient response, and low power consumption, thanks to an efficient switch-mode power supply. Benefit from a linear frequency response at any speaker load, by virtue of the NX6000's SmartSense loudspeaker impedance compensation. Beyond that, Zero-attack limiters supply maximum output with reliable overload protection. The NX6000 comes complete with a built-in stereo crossover, reliable twist-lock speaker connectors, and precise 4-segment LED metering.

Lightweight and efficient Class D amplifier technology

Thanks to revolutionary Class D technology with "near-zero" thermal buildup, the lightweight NX6000 runs very cool, no more massive heat sinks or toroid transformers. We've been impressed with the punch and clarity of this Class D power amp ,and we're sure your band will be too.

Linear frequency response at any speaker load

The NX6000 punches well above its weight. Behringer's SmartSense Technology yields a linear frequency response at any speaker load impedance. On top of that, the NX6000's impressive damping factor offers superior amplifier control over your speakers, ensuring top-notch sound reproduction. When combined with quality loudspeakers, the NX6000 yields powerful, dynamic bass and ultra-smooth high-frequencies.

Designed for exceptional ease-of-use

Operating the NX6000 is dead simple. Benefit from at-a-glance confirmation of your system's vital signs, by way of the NX6000's simple front-panel controls and indicators. Positive-detent gain controls with signal level LEDs on each channel make gain-staging a piece of cake. Rear-panel combo XLR and 1/4" TRS input connectors ensure compatibility with just about any source. Reliable twist-lock speaker connectors prevent unwanted "unplugging" incidents. You also get switchable dual mono and stereo along with an easy-to-use stereo crossover.

Features :

Delivers 3,000W/channel into 4 ohms or 1,600W/channel into 8 ohms
Class D technology with "near-zero" thermal buildup runs extremely cool
Efficient switch-mode power supply gives you low noise, superior transient response, and low power consumption
SmartSense loudspeaker impedance compensation yields linear frequency response at any speaker load
Impressive damping factor offers superior amplifier control over your speakers
Zero-attack limiters supply maximum output with reliable overload protection
Positive-detent gain controls with 4-segment LED metering on each channel make gain-staging easy
Rear-panel combo XLR and 1/4" TRS input connectors ensure compatibility with just about any source
Reliable twist-lock speaker connectors prevent unwanted "unplugging" incidents
Easy-to-use stereo crossover with full-range and bi-amp modes
Thermal overload protection protects your amplifier and speakers

Specs :

Maximum Output Power	2 x 3000 W into 4 Ohms, stereo 2 x 1600 W into 8 Ohms, stereo
Type	High-density, Class-D technology
Input Sensitivity	0.775 V (0 dBu), for rated power into 4 Ohms
Distortion	<0.01%
Frequency Response	20 Hz to 20 kHz, +0 / -2 dB
Damping Factor	>140 at 8 Ohms
Signal to Noise	>100 dB
Input Connections	2 x XLR-1/4″ / 6.3 mm combo jacks (L/R)
Input Impedance	10 kOhms, unbalanced 20 kOhms, balanced
Output Connectors	2 x locking-style speaker connectors (L/R)
Controls Front Panel	Channel A gain knob Channel B gain knob Power switch
Controls Rear Panel	Mode switch (stereo / mono) Crossover switch (LF, Full-Range, HF) Circuit breaker
Indicators	Power: Amber backlit LCD display Limit: 0 dB LED (per channel) Signal: -40, -6, -3 dB LEDs (per channel) Protect: Red LED (per channel)
Cooling	Continuously variable speed fan Back-to-front air flow
Amplifier Protection	Thermal and DC protection Stable into reactive or mismatched loads
Overload Protection	On/off muting, DC-fault power supply shutdown
Power Supply	120 VAC, 50/60 Hz
Fuse	T 25 A H, 250 V
Power Consumption	620 W, at 4 Ohms, 1/8 rated power
Power Connector	Standard IEC receptacle
Dimensions	3.7 x 19.0 x 12.4″ / 94 x 483 x 316 mm (including 0.19″ / 5 mm rubber feet)
Weight	13.0 lb / 5.9 kg