Behringer : NX4-6000 Behringer

4-channel Power Amplifier, 2 x 3,000 Watts at 4 Ohms, with Stereo Crossover, SmartSense Loudspeaker Impedance Compensation, Zero-attack Limiters, Thermal Overload Protection, Twist-lock Speaker Connectors, and LED Meters

หมายเลขสินค้า : NX4-6000

ราคา 24,000^.00 บาท

ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีดำ

ฟรี!

ประกัน 1 ปี
ฟรี!

ปรึกษาด้านเทคนิก

Behringer NX4-6000 Power Amplifier.

เครื่องขยายเสียง,เพาเวอร์แอมป์แบบ 4 ชาแนล Behringer NX4-6000 เป็นเพาเวอร์แอมป์แบบ Class-D Technology มีกำลังขับ 4 x 860 วัตต์ into 4 Ohms , 4 x 440 วัตต์ into 8 Ohms, Built-In Stereo Crossover, ตอบสนองความถี่ 20 Hz to 20 kHz, Balanced XLR-1/4″ Combo Inputs

Lightweight and Packed with Features

The Behringer NX4-6000 packs an impressive amount of power into a lightweight, cool-running unit. This power amplifier delivers 1,600 watts into four channels at 2 ohms or 3,000 watts into two channels at 4 ohms, so you'll have plenty of headroom to work with. Experience low noise, superior transient response, and low power consumption, thanks to an efficient switch-mode power supply. Benefit from a linear frequency response at any speaker load, by virtue of the NX4-6000's SmartSense loudspeaker impedance compensation. Beyond that, zero-attack limiters supply maximum output with reliable overload protection. The NX4-6000 comes complete with a built-in stereo crossover, reliable twist-lock speaker connectors, and precise 4-segment LED metering.

Lightweight and efficient Class D amplifier technology

Thanks to revolutionary Class D technology with "near-zero" thermal buildup, the lightweight NX4-6000 runs very cool — no more massive heat sinks or toroid transformers. We've been impressed with the punch and clarity of this Class D power amp , and we're sure your band will be too.

Linear frequency response at any speaker load

The NX4-6000 punches well above its weight. Behringer's SmartSense technology yields a linear frequency response at any speaker load impedance. On top of that, the NX4-6000's impressive damping factor offers superior amplifier control over your speakers, ensuring top-notch sound reproduction. When combined with quality loudspeakers, the NX4-6000 yields powerful, dynamic bass and ultra-smooth high frequencies.

Designed for exceptional ease of use

Operating the NX4-6000 is dead simple. Benefit from at-a-glance confirmation of your system's vital signs, by way of the NX4-6000's simple front-panel controls and indicators. Positive-detent gain controls with signal level LEDs on each channel make gain staging a piece of cake. Rear-panel XLR combo input connectors ensure compatibility with just about any source. Reliable twist-lock speaker connectors prevent unwanted "unplugging" incidents. You also get switchable dual mono, stereo, and mono bridge modes, along with an easy-to-use stereo crossover.

Features :

Delivers 4 x 1600 Watts into 2 Ohms, 2 x 3000 Watts into 4 Ohms and weighs less than 13.4 lbs / 6.1 kg
Ultimate reliability through revolutionary cool-running High-Density Class-D technology with “near-zero” thermal buildup
Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
Built-in stereo crossover with low-cut, high-cut and full range mode
SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance
“Zero-Attack” limiters offer maximum output level with reliable overload protection
Detented gain controls for precise level setting
Precise 4-segment Signal and Limit LEDs to monitor performance
XLR and 1/4” TRS combination input connectors for compatibility with any source
Professional twist-lock speaker connectors for ultimate reliability
Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
“Back-to-front” ventilation system prevents thermal buildup for reliable operation
Designed and engineered in Germany

Specs :

Maximum Output Power	4 x 1600 W into 2 Ohms per channel, stereo 4 x 860 W into 4 Ohms per channel, stereo 4 x 440 W into 8 Ohms per channel, stereo 2 x 3000 W into 4 Ohms, bridged 2 x 1600 W into 8 Ohms, bridged
Amplifier Class	Class-D
Input Sensitivity	0.775 V (0 dBu), for rated power into 4 Ohms
Distortion	<0.2%
Frequency Response	20 Hz to 20 kHz, +0 / -2 dB
Damping Factor	>145 at 8 Ohms
Signal to Noise	>100 dB
Input Connections	4 x XLR-1/4″ combo jacks
Input Impedance	10 kOhms, unbalanced 20 kOhms, balanced
Output Connectors	4 x locking-style speaker connectors
Controls Front Panel	Channel A, B, C, and D gain knobs Power switch
Controls Rear Panel	2 x mode switches (bridge, stereo, mono) 2 x crossover switches (LF, full range, HF) Circuit breaker
Indicators	Power: Amber LED Limit: 0 dB LED (per channel) Signal: -40, -6, -3 dB LEDs (per channel) Protect: Red LED (per channel)
Cooling	Continuously variable speed fan Back-to-front air flow
Amplifier Protection	Thermal and DC protection Stable into reactive or mismatched loads
Overload Protection	On/off muting, DC-fault power supply shutdown
Power Supply	120 VAC, 60 Hz
Fuse	T 25 A H, 250 V
Power Consumption	620 W, at 2 Ohms, 1/8 rated power
Power Connector	Standard IEC receptacle
Dimensions (W x H x D)	19.0 x 3.7 x 12.4″ / 48.3 x 9.4 x 31.6 cm (including 0.19″ / 5 mm rubber feet)
Weight	13.4 lb / 6.1 kg