Plug-On Wireless System for Condenser Microphones (2.4 GHz)
หมายเลขสินค้า : U3C
ราคา 6,900.00 บาท
-
สินค้าหมดชั่วคราว
-
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144
เลือกจำนวน :
เลือกสี : สีดำ
-
ฟรี!
ค่าจัดส่งทั่วไทย
-
ฟรี!
ประกัน 1 ปี
-
ฟรี!
ปรึกษาด้านเทคนิก
แชร์ไปยัง :
Plug-On Wireless System for Condenser Microphones (2.4 GHz)
ชุดไวเลสสำหรับเปลี่ยนไมโครโฟนแบบคอนเด็นเซอร์ให้เป็นไมโครโฟนแบบไร้สาย Xvive Audio U3C เหมาะสำหรับไมโครโฟนแบบคอนเด็นเซอร์, Utilizes the 2.4 GHz band for license-free worldwide use, Plug-on transmitter supplies 12V or 48V phantom power, Up to 90 feet of wireless range
Easily turn any condenser microphone into a wireless mic with the Xvive Audio U3C Set 2.4 GHz wireless plug-on system. Ideal for capturing vocals and speech in live stage applications, dialogue on set, or even demos in the studio, the U3C Set features a lightweight transmitter that connects directly to your XLR-equipped condenser mic, a compact receiver that plugs into the XLR input of an audio mixer or interface, and easy operation with no menus or cables.
The transmitter supplies 12V or 48V phantom power to accommodate your favorite condenser microphone, and sends uncompressed 24-bit / 48 kHz audio to the receiver up to 90′ away. The internal rechargeable batteries power the U3C Set for enough time to handle an entire concert, worship service, or long-form presentation.
Features
- Utilizes the 2.4 GHz band for license-free worldwide use
- Uncompressed 24-bit / 48 kHz audio resolution with high dynamic range and a broad 20 Hz to 20 kHz frequency response
- Low system latency under 5 ms
- Simple setup with no cables required
- Plug-on transmitter supplies 12V or 48V phantom power for condenser microphones
- Receiver plugs directly into the XLR input of a mixing console, an audio interface, or an active PA system
- Easy menu-free channel selection on transmitter and receiver
- Six available channels allow up to six systems to be used at one time (additional systems available separately)
- Balanced 3-pin XLR input and output connectors
- Transmitter power/mute switch for easy signal control at the mic
- Internal rechargeable batteries provide three to seven hours of operating time for the transmitter and up to five hours of use for the receiver
- Includes USB cable for convenient recharging
- For use with balanced condenser microphones only—phantom power may permanently damage unbalanced or dynamic microphonesa
Specs
- Wireless Transmission Digital 2.4 GHz
- Number of RF Channels 6
- Included Transmitters 1 x Plug-On
- Diversity Non-Diversity
- RF Frequency Band 2400 to 2483.5 MHz
- RF Bandwidth 483.5 MHz
- Max Operating Range 90′ / 27.4 m
- Max Systems per Setup 6
- Sample Rate/Resolution 48 kHz / 24-Bit
- Latency <5 ms
- Dynamic Range 110 dB
- Encryption None
- Receiver
- Form Factor Plug-In
- Mounting Options Plug-In
- Antenna 2 x 1/4 Wave Sleeve Dipole, Fixed
- Number of Audio Channels 1
- Audio I/O 1 x XLR 3-Pin Male Balanced Mic Output
- Frequency Response 20 Hz to 20 kHz-3 (Dependent on Mic)
- Network I/O None
- Word Clock I/O None
- USB/Lightning Connectivity 1 x Micro-USB (Charging)
- Impedance XLR Output:
- 470 Ohms (Balanced)
- Approximate RF Sensitivity -88 dBm
- Power Requirements Battery
- Battery Type 1 x Built-In Rechargeable (Included)
- Internal Battery Capacity 860 mAh
- Battery Charging Time 2 Hours
- Approx. Battery Life 5 Hours
- AC/DC Power Adapter VDC Not Included
- Display & Indicators 1 x LED (Channel)
- 1 x LED (Sync)
- 1 x LED (Battery Status, Power)
- Housing Metal, Plastic
- Operating Temperature 0 to 134°F / -18 to 57°C
- Dimensions 1.2 x 3.9 x 1.1″ / 31.0 x 98.0 x 29.0 mm
- Weight 3.2 oz / 92.0 g
- Transmitter
- Form Factor Plug-On
- RF Output Power Up to 10 mW (EIRP)
- Audio I/O 1 x XLR 3-Pin Female Balanced Input (Lockable)
- Phantom Power +12 V
- +48 V
- Pad None
- Muting Off/On Switch
- Audio Input Level 2.8 Vpp (Max)
- Signal Processing None
- Frequency Response 20 Hz to 20 kHz-3 (Dependent on Mic)
- Sync Method Manual
- Antenna 1 x 1/4 Wave Sleeve Dipole, Fixed
- Approximate RF Sensitivity -88 dBm
- Power Requirements Battery
- Battery Type 1 x Built-In Rechargeable (Included)
- Internal Battery Capacity 1000 mAh
- Battery Charging Time 2 Hours
- Approx. Battery Life 7 Hours
- USB/Lightning Connectivity 1 x Micro-USB (Charging)
- Display & Indicators 1 x LED (Channel)
- 1 x LED (Battery Status, Power)
- Housing Metal, Plastic
- Operating Temperature 0 to 134°F / -18 to 57°C
- Dimensions 1.2 x 3.9 x 1.1″ / 31.0 x 98.0 x 29.0 mm
- Weight 3.8 oz / 108.0 g
ไม่พบข้อมูล
เปิด จันทร์ - อาทิตย์
เวลา 9.30 - 18.30 น.
32 ซอยรามคำแหง 24 แยก 30 (หมู่บ้านศิขริน) แขวงหัวหมาก เขตบางกะปิ กรุงเทพมหานคร 10240
บริการให้คำปรึกษา
English Version : 082-623-6663