Crown : T3 Crown

CROWN T3 Power Amplifier 2 ch

หมายเลขสินค้า : T3

ราคา 12,900^.00 บาท

ราคาปกติ : 21,100.00 บาท

ประหยัดไป 8,200.00 บาท

ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีมิดไนท์บลู

ฟรี!

ประกัน 1 ปี
ฟรี!

ปรึกษาด้านเทคนิก

CROWN T3 Power Amplifier 450W

พาวเวอร์แอมป์ขนาด 2U (2 Channels) กำลังขับ 450W มีสวิทช์โหมดการทำงานให้เลือกได้ 3 แบบ ไม่ว่าจะเป็น Stereo, Parallel และ Bridge

Crown T3 450W 2-channel Amplifier Crown T3 is part of Crown’s T line, which is a line of amplifiers that will elevate the quality of your environment for concerts, parties and large events.

The T series has equipment with six LEDs included, which indicate the presence of signal, clip and fault per channel, two gain controls and can be used in stereo, parallel and bridge-mono mode.

Plus, the Crown T amplifiers feature protection from power outages, non-charging and frequency interference that gives you greater peace of mind during your performances!

Features:

Parallel stereo mono mode in brigde.
Selectable input sensitivity: 0.665V and 1.4V.
RCA and XLR input connectors; Output Speakon.
2 gain controls, a power switch, a power LED, 2 groups of six LEDs correspond respectively.
Channel at work, cut and fault status.

SPECIFICATIONS

Frequency response	20Hz-20kHz, + 0 / -1dB
Total harmonic distortion (THD)	<0.5%, 20Hz-20kHz
Intermodulation distortion	= / <0.35%
Conversion Rate	> 10V / us
Voltage gain	31dB
Damping factor	> 200 (8Ω, 10 Hz-400 Hz)
Signal to noise ratio (20 Hz-20 kHz below rated power, A-weighted sound level)	> 100 dB
Crosstalk	-75dB @ 1kHz, -59dB @ 20kHz, based on rated output power
Input sensitivity	0.775V or 1.4V (rated output power 8Ω)
input resistance	20kΩ balanced, 10kΩ unbalanced
Input connector	One balanced XLR connector or one unbalanced RCA connector per channel
Output connector	One 4-pin Speakon ® and one pair of posts per channel
Front panel components	Power switch, channel gain control knob
Rear panel components	Output mode switch: stereo, parallel, bridge; input sensitivity switch: 0.775V or 1.4V
Power Indicator	Blue LED
Signal Indicator	One green LED per channel
Clip Indicator	One yellow LED per channel
Fault Indicator	One red LED for each channel, indicating that the channel is closed
Power cables	Power plug: 10A, 250V; power cord: CCC 3×1.5mm 2
protection	Protection circuit against short circuit, no load, switch noise, radio interference
Ventilation	Backward air convection mechanism
Cooling	Internal air exhaust cooling, fan cooling, fast adjustment, temperature protection
Dimensions (W × H × D)	19 ”x 3.46” x 12.45 ”(482 mm x 88 mm x 316.4 mm)
Net Weight	28.0 lb (12.7 kg)
Shipping weight	32.4 lb (14.7 kg)