YAMAHA : DXR8MKII YAMAHA

2-Way Active Loudspeaker 8″ 1100W

หมายเลขสินค้า : DXR8MKII

video

ราคา 21,200^.00 บาท

ราคาปกติ : 26,500.00 บาท

ประหยัดไป 5,300.00 บาท

สินค้าหมดชั่วคราว
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีดำ

ฟรี!

ประกัน 1 ปี
ฟรี!

ปรึกษาด้านเทคนิก

2-Way Active Loudspeaker 8″ 1100W

ลำโพง DXR8mkII เป็นลำโพงขนาดเล็กสุดในตระกูล DXR mkII ซีรีส์ Bass-Reflex ABS Cabinet, ดอกลำโพงขนาด 8 นิ้ว Woofer เสียงแหลมขนาด 1.75นิ้ว Compression Tweeter, มีกำลังขับ 1100 วัตต์ Peak Biamplified Class-D Design, FIR-X Crossover, XLR, 1/4″, and RCA Inputs, XLR Thru and Output

The Yamaha DXR8mkII is a 15″ 1100W 2-Way active loudspeaker which provides clear audio and extremely high output levels in an unobtrusive and durable design, ideal for live sound applications that require wide bandwidth audio reproduction. The cabinet has a rugged ABS construction with a bass-reflex design for enhanced bass performance with reduced turbulence. The high-power 15″ woofer and 1.75″ compression tweeter offer high-resolution audio with a wide frequency response and deep bass. Integrated DSP uses a FIR-X linear phase filter for an ultra-smooth crossover, while the protection circuits optimize and protect driver performance.

The speaker has a biamplified Class-D design that provides a combined peak output power of 1100W for a strong performance with minimal distortion. The integrated D-contour processor allows you to use the speaker as a main/FOH speaker or as a stage monitor. The rear panel has XLR, 1/4″, and RCA inputs, as well as XLR thru and output connectors for wide compatibility with a variety of professional sound systems and devices.

The speaker can be placed on a floor or stage, but also has useful mounting options. A dual 35mm pole socket allows you to mount the speaker on top of a subwoofer with horizontal or 7° tilt toward the floor, while M8 fly points allow suspended installation. An optional U-bracket is available separately for wall mounting. The Yamaha DXR8mkII ships with a power cord.

Features

High-powered portable loudspeaker with multi-use flexibility
8″ speaker, powered by 1,100 watts of peak power in a 2-way design
Built-in 3-channel mixer lets you connect microphones or line-level sources directly without an entire PA system
Built-in DSP for phase optimization and transparent dynamic control
FIR-X tuning Proprietary sound-processing technology utilizing a linear-phase FIR filter delivers high-quality sound
ABS cabinet is durable, with a low-resonance design for maximum sound quality

Specs

Configuration Active 2-Way
Enclosure Type Bass-Reflex Loudspeaker
Total Power Capacity 1100 W Peak 700 W RMS
Amplifier Power Rating LF: 950 W Peak 600 W RMS
HF:150 W Peak 100 W RMS
Amplifier Class Class-D
Drivers HF Driver 1 x 1.75″ / 44.45 mm Compression Driver with 1″ / 25 mm Throat
LF Driver 1 x 8″ / 20.32 cm Woofer
LF Voice Coil 2″ / 5.08 cm
Magnet HF: Neodymium
LF:Ferrite
Performance
Frequency Range 57 Hz to 20 kHz -10 dB
Maximum SPL 130 dB SPL
Coverage Angle 90° H x 60° V (Horn)
Input Sensitivity Line Input: +1 dBu (Max)
Mic Input:-32 dBu (Max)
Line Input:-13 dBu (Max)
Mic Input:-22 dBu (Center)
Line Input:+11 dBu (Center)
Line Input:-3 dBu (Center)
Max Input Level Line Input:+24 dBu (Balanced)
Mic Input:+20 dBu (Balanced)
Line Input:+16 dBu (Unbalanced)
I/O Impedance XLR Mic Input:12 kOhms (Balanced, Mono)
XLR Line Input:8 kOhms (Balanced, Mono)
1/4″ TRS Line Input:40 kOhms (Unbalanced, Stereo) 20 kOhms (Unbalanced, Mono)
Protections AC Coupling, Crossover Overload, DC Fault
Connectivity
Audio I/O 1 x XLR Input
2 x 1/4″ Input
2 x RCA Input
1 x XLR Thru
1 x XLR Link Output
Signal Processing
Crossover 2.4 kHz
Filters 2 x High-Pass:100 Hz, 24 dB/Octave 120 Hz, 24 dB/Octave
Dynamic Processing Compression, Multiband Limiter
Digital Signal Processing 48-Bit DSP: FIR Filter, Venue Settings
Max Sample Rate/Resolution 48 kHz / 24-Bit
Power
AC Input Power Universal:100 to 240 VAC, 50 / 60 Hz
AC Power Connector 1 x IEC Input
Power Consumption 90 W
Physical
Mounting 2 x M8 (Top)
1 x M8 (Rear)
1 x 1.38″ / 35 mm Pole Socket (Dual Angle)
Handles 1 x Top
Cooling Fan (Variable Speed)
Construction Material ABS
Dimensions 11.0 x 18.0 x 11.0″ / 280.0 x 458.0 x 280.0 mm
Weight 28.2 lb / 12.8 kg