Crown : T10 Crown

CROWN T10 Power Amplifier 2 ch
หมายเลขสินค้า : T10

ราคา 41,900.00 บาท

ราคาปกติ : 68,400.00 บาท

ประหยัดไป 26,500.00 บาท

เลือกจำนวน :

เลือกสี : สีมิดไนท์บลู

  • สีมิดไนท์บลู

  • รับประกันสินค้า


    ประกัน 1 ปี

  • ปรึกษาฟรี



แชร์ไปยัง :
facebook twitter image อีเมล image

CROWN T10 Power Amplifier 1350W
พาวเวอร์แอมป์ขนาด 2U (2 Channels) กำลังขับ 1350W มีสวิทช์โหมดการทำงานให้เลือกได้ 3 แบบ ไม่ว่าจะเป็น Stereo, Parallel และ Bridge
T series is a professional power amplifier designed by CROWN for entertainment venues, cinemas, mobile performances, conference rooms and other places. In view of the small space in most entertainment places and the convenience of mobile use, the T series adopts a compact structure design. 
Based on the Crown platform’s professional technology, a simple and efficient amplification circuit is adopted, and the upgraded cooling system design ensures the good performance of the product. For more than 60 years, Crown has always focused on the research and innovation of power amplifier products. T series professional power amplifiers will definitely bring you a satisfactory experience!

  • Bridge parallel mono stereo mode
  • Selectable input sensitivity: 0.775V and 1.4V
  • RCA and XLR input connectors; Output Speakon
  • 2 gain controls, 1 power switch, 1 power LED, 2 groups of 6 LEDs respectively match
  • Working Channel, Cut-Off and Fault Status
  • Class H Amplifiers
  • 220V Voltage


Frequency response 20Hz-20kHz, + 0 / -1dB
Total harmonic distortion (THD) <0.5%, 20Hz-20kHz
Intermodulation distortion = / <0.35%
Conversion Rate > 10V / us
Voltage gain 36dB
Damping factor > 200 (8Ω, 10Hz-400Hz)
Signal to noise ratio (20 Hz-20 kHz below rated power, A-weighted sound level) > 100dB
Crosstalk -75dB @ 1kHz, -59dB @ 20kHz, based on rated output power
Input sensitivity 0.775V or 1.4V (rated output power 8Ω)
input resistance 20kΩ balanced, 10kΩ unbalanced
Input connector One balanced XLR connector or one unbalanced RCA connector per channel
Output connector One 4-pin Speakon ® and one pair of posts per channel
Front panel components Power switch, channel gain control knob
Rear panel components Output mode switch: stereo, parallel, bridge; input sensitivity switch: 0.775V or 1.4V
Power Indicator Blue LED
Signal Indicator One green LED per channel
Clip Indicator One yellow LED per channel
Fault Indicator One red LED for each channel, indicating that the channel is closed
Power cables Power plug: 10A, 250V; power cord: CCC 3×1.5mm 2
protection Protection circuit against short circuit, no load, switch noise, radio interference
Ventilation Backward air convection mechanism
Cooling Internal air exhaust cooling, fan cooling, fast adjustment, temperature protection
Dimensions (W × H × D) 19 ”x 3.46” x 14.5 ”(482 mm x 88 mm x 369 mm)
Net Weight 43.0 lb (19.5 kg)
Shipping weight 47.4 lb (21.5 kg)