Sennheiser : MKH 8070 Sennheiser

Sennheiser MKH 8070 Moisture-Resistant Long Shotgun Microphone

หมายเลขสินค้า : MKH 8070

ราคา 82,920^.00 บาท

ราคาปกติ : 110,560.00 บาท

ประหยัดไป 27,640.00 บาท

ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีน้ำตาล

ฟรี!

ประกัน 1 ปี
ฟรี!

ปรึกษาด้านเทคนิก

Sennheiser MKH 8070 Moisture-Resistant Long Shotgun Microphone

The 18" long Sennheiser MKH 8070 moisture-resistant shotgun microphone is purpose built for focused, top-tier audio capture in high-pressure outdoor environments such as sporting events and broadcast production. With extreme directivity, drastically low self-noise, and ultrahigh sensitivity, the MKH 8070 delivers professional sonic performance that's ready for mixing.

This shotgun microphone exhibits a pronounced lobar polar pattern, ensuring a consistently narrow focus and transparent, undistorted off-axis tone. Its wide frequency response, transformerless output, and high SPL handling let you record the action with uncompromised clarity.

Performs in Adverse Environmental Conditions

When your work takes you outdoors, you're bound to encounter humidity and condensation, which can cause many mics to fail. The MKH 8070's RF circuit design makes it highly immune to moisture, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions.

Professional Sound Quality

Offering the same sonic signature as Sennheiser's other 8000-Series microphones, the MKH 8070 was engineered with the experienced professional in mind. Its 45 Hz to 20 kHz frequency response incorporates a gentle rise above 2 kHz to increase intelligibility and a natural bass roll-off to mitigate rumble. Its extremely low self-noise of 8 dBA and ultrahigh sensitivity of -19 dB enable studio-worthy signal purity without requiring noise reduction and gain boosting in postproduction.

Phantom Powered

The MKH 8070 boasts a transformerless and fully floating balanced output for optimal signal integrity. Thanks to its 3-pin XLR output and compliance with 44 to 52 VDC phantom power, the MKH 8070 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras.

Digital Compatibility

When used with the optional MZD 8000 digital module, the MKH 8070 becomes a digital microphone that outputs AES42 signal at up to 24-bit / 192 kHz resolution and allows remote control of DSP functions such as low-cut filtering and attenuation.

Ideal for Boompole Mounting

The MKH 8070's metal body features a nonreflective Nextel coating to prevent distracting visual reflections. Mount the MKH 8070 directly on a stand or boompole using the supplied mic clip, or place it in the separately available Sennheiser MZS 20-1 combination shockmount, pistol grip, and stand adapter to prevent the transfer of vibrations to the microphone.

Windscreen Minimizes Wind Noise

The MKH 8070 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in indoor or outdoor environments, consider the Sennheiser MZW 80-1 blimp-style windshield (available separately and requires the MZS 20-1 pistol grip).

Features

For Broadcast and Sporting Events
Moisture-Resistant for Humid Conditions
No Switches, Buttons, or Dials
45 Hz to 20 kHz Frequency Response
Pronounced Lobar Pickup Pattern
Extreme Directivity
Ultralow 8 dBA Self-Noise
Ultrahigh Sensitivity of -19 dB
Transparent, Undistorted Off-Axis Tone
Windscreen Reduces Wind Noise

Sennheiser MKH 8070 Specs

Microphone

Form Factor	Stand/Boom Mount
Sound Field	Mono
Operating Principle	Line Gradient
Capsule	1 x Condenser
Polar Pattern	Lobar
Orientation	End Address
Circuitry	Solid-State
Pad	None
High-Pass Filter	None
Tone Adjustment	None
Indicators	None
On-Board Controls	None
Windscreen	Foam (Included)

Performance

Frequency Range	45 Hz to 20 kHz
Maximum SPL	124 dB SPL
Off-Axis Rejection	>20 dB at 60° 50 dB at 120° 45 dB at 180°
Impedance	25 Ohms
Load Impedance	2 Kilohms
Sensitivity	-19 dBV/Pa at 1 kHz
Equivalent Noise Level	8 dB A-Weighted 21 dB CCIR

Connectivity

Output Connectors (Analog)	1 x XLR 3-Pin Male (on Mic)
Wireless Connectivity	None

Power

Operating Voltage	48 V ± 4 V (Phantom Power)
Operating Current Consumption	3.3 mA

Physical

Color	Black
Mounting	3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)
Construction Material	Metal
Operating Temperature	14 to 140°F / -10 to 60°C
Dimensions	ø: 0.75 x L: 18.31" / ø: 19 x L: 465 mm (Microphone)
Weight	11.71 oz / 332 g (Microphone)