Sennheiser : MKH 50-P48 Sennheiser

The MKH 50 P48 Microphone from Sennheiser
หมายเลขสินค้า : MKH 50-P48

ราคา 60,250.00 บาท

ราคาปกติ : 80,337.00 บาท

ประหยัดไป 20,087.00 บาท


  • สินค้าหมดชั่วคราว
  • *กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

The MKH 50 P48 Microphone from Sennheiser

 

The MKH 50 P48 Microphone from Sennheiser is a high quality, professional condenser microphone specifically designed for spot capturing in recording and sound reinforcement applications. The MKH 50 offers exceptional attenuation at the lateral sections of the capsule, for a focused pick up without off-axis noise. Its wide frequency response and high sensitivity result in pristine audio fidelity, no matter the source. It also has a low-frequency roll-off switch to minimize rumble/noise, and a pre-attenuation switch in case you'll mount the microphone near to high transients. The MKH 50 requires +48V phantom power, and is more than suitable for capturing vocals or instruments.

 

  • A pressure-gradient condenser mic specifically created for spot recording
  • Supercardioid polar pattern to provide focused capture and extreme off-axis rejection
  • Low-frequency roll-off switch to minimize rumble and noise
  • Switchable pre-attenuation provides an additional 10 dB of headroom to prevent distortion from close-proximity transient signals
  • Uses +48V phantom power

 

Features

  • Dialog Boompole Microphone
  • Pressure Gradient Condenser
  • For Spot Capture
  • For Recording / Sound Reinforcement
  • Supercardioid Polar Pattern
  • Low-Frequency Roll-Off Switch
  • Pre-Attenuation Switch
  • Uses +48V Phantom Power

Sennheiser MKH 50 Specs

Microphone
Operating Principle Pressure Gradient
Polar Pattern Supercardioid
Pad -10 dB
High-Pass Filter 30 Hz, 12 dB/Octave
Performance
Frequency Range 40 Hz to 20 kHz
Maximum SPL 134 dB SPL
142 dB SPL
Impedance 150 Ohms
Load Impedance 1000 Ohms
Equivalent Noise Level 12 dB A-Weighted
21 dB CCIR
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin
Power
Operating Voltage 48 V ± 4 V
Operating Current Consumption 2 mA
Physical
Dimensions ø: 0.98 x L: 5.91" / ø: 25 x L: 150 mm
Weight 3.88 oz / 110 g
Packaging Info
Package Weight 1.685 lb
Box Dimensions (LxWxH) 13.9 x 5.3 x 2.75"