ราคา 121,550.00 บาท
ราคาปกติ : 143,000.00 บาท
ประหยัดไป 21,450.00 บาท
2-Channel Power Amplifier, 700W @ 8 ohms
The all new CX Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three 70-volt direct models have been designed from the ground up, combining QSC's exclusive PowerWave technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and reliability, the CX Series is the ideal solution ot any permanently installed sound system.
The new CX amplifiers are equipped with many contractor-specific features including 1dB detented gain controls for easily repeatable settings and a custom security cover for tamper-proof installations. Active Inrush Limiting eliminates AC inrush current, cutting the need for power sequencers.
CXs also now include an HD-15 Data Port connector to interface with QSControl, QSC's computer-controlled audio system, that allows remote amplifier monitoring and control via a standard Ethernet network.
Features
SPECIFICATIONS | CX302 | CX502 | CX702 | CX902 | CX1102 | CX302V | CX602V | CX1202V |
---|---|---|---|---|---|---|---|---|
POWER PER CHANNEL, STEREO MODE, Both Channels Driven | ||||||||
8Ω, 20 Hz–20 kHz, 0.05% THD | 200 W | 300 W | 425 W | 550 W | 700 W | - | 550 W | 700 W |
4Ω, 20 Hz–20 kHz, 0.05% THD | 325 W | 500 W | 700 W | 900 W | 1100 W | - | - | 1100 W |
2Ω, 1 kHz, 1% THD | 600 W | 800 W | 1200 W | 1500 W | 1700 W | - | - | - |
70V, 20 Hz–20 kHz, 0.05% THD |
400 W with IT-42* |
- | - | 400 W | 800 W | 200 W | 400 W | 800 W |
70 V, 1 kHz, 0.05% THD | - | - | - | 440 W | 1000 W | 250 W | 440 W | 1000 W |
70 V, 1 kHz, 1% THD | - | - | - | 600 W | 1200 W | 300 W | 600 W | 1200 W |
POWER, BRIDGED MONO MODE | ||||||||
16Ω, 20 Hz–20 kHz, 0.1% THD | 400 W | 600 W | 850 W | 1100 W | 1400 W | - | 1100 W | 1400 W |
8Ω, 20 Hz–20 kHz, 0.1% THD | 700 W | 1100 W | 1500 W | 2000 W | 2200 W | - | - | 2200 W |
4Ω, 1 kHz, 1% THD | 1200 W | 1600 W | 2400 W | 3000 W | 3400 W | - | - | - |
140 V, 20 Hz–20 kHz, 0.05% THD | - | - | - | 800 W | 1600 W | 400 W | 800 W | 1600 W |
140 V, 1 kHz, 0.05% THD | - | - | - | 880 W | 2000 W | 500 W | 880 W | 2000 W |
140 V, 1 kHz, 1% THD | - | - | - | 1200 W | 2400 W | 600 W | 1200 W | 2400 W |
Noise, 20 Hz–20 kHz | -107 dB | -107 dB | -106 dB | -106 dB | -106 dB | -106 dB | -106 dB | -106 dB |
Input Sensitivity @ 8 ohms | 1.26 Vrms | 1.23 Vrms | 1.16 Vrms | 1.17 Vrms | 1.35 Vrms | 1.26 Vrms | 1.26 Vrms | 1.26 Vrms |
Maximum Voltage Gain | 30 dB | 32 dB | 34 dB | 35 dB | 35 dB | 35 dB | 35 dB | 35 dB |
Output Circuitry Class | AB+B | AB+B | H, 2-tier | H, 2-tier | H, 2-tier | AB+B | AB+B | H, 2-tier |
ALL MODELS | ||||||||
Distortion (SMPTE-IM) | Less than 0.02% | |||||||
Distortion (Typical) 20 Hz–20 kHz: 10 dB below rated power 1.0 kHz and below: full rated power |
Less than 0.01% THD Less than 0.01% THD |
|||||||
Frequency Response | 20 Hz–20 kHz, ±0.2 dB | |||||||
Damping Factor |
Greater than 500
|
|||||||
Input Impedance |
6 kΩ unbalanced, 12 kΩ balanced
|
|||||||
Input Clipping |
10 V rms (+22 dBu)
|
|||||||
Cooling |
Variable-speed fan, rear-to-front air flow
|
|||||||
Connectors, each channel |
Input: 3-pin XLR & 3-pin detachable terminal blocks (1 each per channel)
Output: Safety-shrouded barrier strip |
|||||||
Amplifier Protection |
Full short circuit, open circuit, thermal, ultrasonic, and RF protection.
Stable into reactive or mismatched loads. |
|||||||
Load Protection |
On/off muting, DC-fault power supply shutdown
|
|||||||
Dimensions |
19" (48.3 cm) wide, 3.5" (8.9 cm) tall (2 RU),
14" (35.6 cm) deep (from front mounting rails) |
|||||||
Weight |
21 lb (9.5 kg) net
27 lb (12.3 kg) shipping |
|||||||
* An isolation transformer (the IT-42) is available for the CX302, which converts its low-impedance outputs to isolated 400 W per channel constant-voltage outputs. |
CURRENT CONSUMPTION (120 V) mulitply by 0.5 for 230 V |
CX302 | CX502 | CX702 | CX902 | CX1102 | CX302V | CX602V | CX1202V | |
---|---|---|---|---|---|---|---|---|---|
Idle current (no audio program material) |
0.8 A | 0.9 A | 0.9 A | 0.9 A | 0.9 A | 0.8 A | 0.9 A | 0.9 A | |
1/8 of full power, pink noise (typical of program material at maximum unclipped or rarely clipping power) |
8Ω + 8Ω 4Ω + 4Ω 2Ω + 2Ω 70V+70V |
3.8 A 6.0 A 9.6 A - |
5.6 A 9.0 A 14.0 A - |
5.0 A 7.9 A 11.8 A - |
6.0 A 9.5 A 14.0 A - |
7.6 A 11.6 A 16.6 A - |
- - - 5.7 A |
- - - 8.7 A |
- - - 12.0 A |
1/3 of full power, pink noise (typical of program material with severe clipping) |
8Ω + 8Ω 4Ω + 4Ω 2Ω + 2Ω 70V+70V |
5.4 A 8.9 A 14.3 A - |
8.0 A 13.3 A 21.0 A - |
8.4 A 13.5 A 22.0 A - |
11.0 A 17.0 A 27.0 A - |
13.1 A 20.0 A 30.4 A - |
- - - 8.0 A |
- - - 13.0 A |
- - - 19.0 A |
THERMAL LOSSES (ALL MODELS)
|
|||||||||
---|---|---|---|---|---|---|---|---|---|
Idle | 1/8 Power pink noise | 1/3 Power pink noise | Full Power (sine) | ||||||
Model | Load | BTU/hr | kcal/hr | BTU/hr | kcal/hr | BTU/hr | kcal/hr | BTU/hr | kcal/hr |
CX302 |
8Ω + 8Ω 4Ω + 4Ω 2Ω + 2Ω |
200 200 200 |
50 50 50 |
565 995 1740 |
145 250 440 |
720 1245 2255 |
180 315 570 |
715 1295 2425 |
180 325 610 |
CX502 |
8Ω + 8Ω 4Ω + 4Ω 2Ω + 2Ω |
165 165 165 |
40 40 40 |
910 1570 2560 |
230 395 645 |
1130 1945 3470 |
285 490 875 |
1090 1875 3585 |
275 475 905 |
CX702 |
8Ω + 8Ω 4Ω + 4Ω 2Ω + 2Ω |
200 200 200 |
50 50 50 |
790 1310 2255 |
200 330 570 |
1080 1910 3190 |
275 480 805 |
1245 2320 4610 |
315 585 1160 |
CX902 |
8Ω + 8Ω 4Ω + 4Ω 2Ω + 2Ω |
220 220 220 |
55 55 55 |
900 1525 2305 |
225 385 580 |
1415 2560 4265 |
355 645 1075 |
1705 3070 5835 |
430 775 1470 |
CX1102 |
8Ω + 8Ω 4Ω + 4Ω 2Ω + 2Ω |
225 225 225 |
57 57 57 |
1195 2135 3975 |
300 540 1000 |
1760 2335 5210 |
445 590 1315 |
2050 3755 NA |
515 945 NA |
CX302V | 70 V + 70 V | 200 | 50 | 1125 | 285 | 1295 | 325 | 1080 | 270 |
CX602V | 70 V + 70 V | 165 | 40 | 1785 | 450 | 2260 | 570 | 2055 | 520 |
CX1202V | 70 V + 70 V | 200 | 50 | 2175 | 550 | 2605 | 655 | 4230 | 1065 |