ราคา 3,990.00 บาท
ค่าจัดส่งทั่วไทย
ประกัน 1 ปี
ปรึกษาด้านเทคนิก
2-in/2-out USB-C Audio Interface with 1x XLR Input, 1x 1/4" Input, and Software Bundle - Mac/PC/iOS.
ออดิโออินเตอร์เฟสรุ่นใหม่ล่าสุด จาก TASCAM เชื่อมต่อแบบ USB-C อินพุตเอ้าท์พุตทั้งหมด 2-in/2-out ทำงานด้วยความละเอียดสูงสุดที่ 24bit/192kHz มีระบบ Direct Monitor ที่จะสามารถทำให้คุณฟังเสียง ณ ขณะบันทึกเสียง เเละยังมีค่า Latency ที่ต่ำมาก มาพร้อม Plugin และโปรแกรมที่แถมมาให้อีกมากมาย แถมซีรีย์นี้ยัง Support โปรแกรม Live Streaming เจ้าดังอย่าง OBS อีกด้วย ไม่ว่าจะนำไป Live อะไร Live ที่ไหนก็สะดวกสุดๆ คุ้มค่ามากๆ
Whether you're tracking away from home or cutting demos on the road, the TASCAM US-1x2HR USB-C audio interface (PC/Mac/iOS) puts rich 192kHz audio and super-low-latency at your fingertips. The TASCAM US-1x2HR's onboard Ultra-HDDA mic preamp gives you 57dB of clean gain to capably drive most dynamic mics and onboard +48V phantom power to support your studio condensers. You also get a TRS/TS 1/4-inch input with Line/Inst selector to simultaneously capture a rhythm guitar, bass, or keyboard as you track vocals. Best of all, the TASCAM US-1x2HR delivers all of these features over USB bus power — just a single USB-C cable (included) from your laptop to your interface is all you need for power and connectivity. As for monitoring, the TASCAM US-1x2HR gives a 1/4-inch headphone out and stereo RCA line outs, each with independent level controls so you can mix projects on loudspeakers or your favorite studio cans. There's even an RCA input around back for interfacing with DJ gear and vintage/prosumer electronics. Making music on the move? For quality and usability, Millionhead stands behind the TASCAM US-1x2HR USB-C audio interface.
The TASCAM US-1x2HR employs an Ultra-High Definition Discrete Architecture (Ultra-HDDA) mic preamp design that delivers audio with extremely low self-noise to capture every detail of your musical performances. With one preamp, the US-1x2HR is ideal for solo singer/songwriters. You also get a TRS/TS 1/4-inch jack, so you can easily track instruments. There's even an unbalanced RCA stereo input around back for your consumer electronics.
Capturing audio in future-resistant 24-bit/192kHz quality is no problem when you've got the TASCAM US-1x2HR in tow. Higher sample rates means potentially greater top-end detail on vocals, acoustic guitars, and more.
High levels of latency — the time it takes for an audio interface to convert your analog signal to digital as it enters your computer and back again in the form of sound — can render even the best interfaces practically unusable. Fortunately, this is no concern with the TASCAM US-1x2HR. The latest drivers give you latency as low as four samples over its rock-solid USB-C connection. In other words, you can monitor yourself through headphones with no trace of delay as you pour your heart into a performance.
Whether you're new to digital recording or not, the TASCAM US-1x2HR's included software bundle is a major value add. This bundle includes licenses to Cubase LE (Mac/PC) and Cubasis LE (iOS), two great platforms for capturing music on the move. Cubase LE provides a cutting-edge music production studio, giving users what they need to get started creating music. Cubasis LE is a compact version of Cubase for your iPad, providing the same look as its bigger sibling.
Sampling frequency | 44.1k/48k/88.2k/96k Hz |
Quantization bit rate | 16/24bit |
Analog audio inputs | |
MIC IN (IN 1) | |
Connector | XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED |
Input impedance | 2.4k ohms |
Nominal input level | |
GAIN:MAX | -65dBu (0.0004Vrms) |
GAIN:MIN | -8dBu (0.3090Vrms) |
Maximum input level | +8dBu (1.9467Vrms) |
Gain | 57dB |
LINE/INST IN (IN 2) | |
LINE IN | |
Connector |
6.3mm(1/4") TRS-jack(T:HOT, R:COLD, S:GND), BALANCED * When set to "LINE" at LINE/INST switch |
Input impedance | 10k ohms |
Nominal input level | |
GAIN:MAX | -41dBu(0.0069Vrms) |
GAIN:MIN | +4dBu(1.228Vrms) |
Maximum input level | +20dBu(7.75Vrms) |
Gain | 57dB |
INST IN | |
Connector |
6.3mm(1/4") TS-jack(T:HOT, S:GND), UNBALANCED * When set to "INST" at LINE/INST switch |
Input impedance | 1M ohms |
Nominal input level | |
GAIN:MAX | -58dBV(0.0013Vrms) |
GAIN:MIN | -13dBV(0.2239Vrms) |
Maximum input level | +3dBV(1.1425Vrms) |
Gain | 57dB |
LINE L/R IN | |
Connector | RCA pin-jack, UNBALANCED |
Input impedance | 10k ohms |
Maximum input level | +6dBV(1.9953Vrms) |
Analog audio outputs | |
LINE OUT | |
Connector | RCA pin-jack, UNBALANCED |
Output impedance | 100 ohms |
Maximum output level | +6dBV (1.995Vrms) |
PHONES | |
Connector | 6.3mm(1/4") stereo phone jack |
Maximum output level | 18mW+18mW or more (THD+N 0.1% or less, 32ohms loaded) |
Control IN / OUT | |
USB | |
Connector | USB B type 4-pin |
Format | USB2.0 HIGH SPEED |
DC IN 5V | |
Connector | USB Micro B type |
Power | |
When connected PC | USB bus powered |
When connected iOS | AC Adapter (TASCAM PS-P520, sold separately) |
Power consumption | 2.5W |
Dimensions | 146(W) × 55(H) × 120(D)mm |
Weight | 623g |
Operating temperature | 5 to 35˚C |
Accessories | USB cable (1.5m), Installation manual, User's manual, warranty card |