The first Dante, Pro Tools, HD and Interface system with a monitor controller, User-defined settings configurable with 12 outputs
ออดิโอ อินเตอร์เฟส ที่มีการเชื่อมต่อแบบ Dante ที่มาพร้อมกับ monitor controller ใช้สำหรับควบคุมอุปกรณ์ Audio-over-IP ของ Focusrite อย่างเช่น Red 4Pre, Red 8Pre, Red 8Line and Red 16Line monitor sections. มีฟังก์ชั่น Talkback ที่ถ้าเชื่อมต่อกับ ออดิโอ อินเตอร์เฟส รุ่น Red ของ Focusrite จะสามารถใช้งานได้ถึง 4 Groups และสามารถเชื่อมต่อใช้งานฟังก์ชั่น Talkback กับอุปกรณ์ที่มี Dante ได้อีกด้วย RedNet R1 ตัวนี้สามารถซัพพอร์ท Monitor Output สูงสุดได้ถึง 12 Channels และซัพพอร์ท Mono 7.1.4 Surround ด้วย
Unleash The Power Of Red
RedNet R1 is designed for professionals who need to adapt their audio configurations quickly to suit the ever-increasing demands of the studio environment, and interact with their audio system like never before. Inputs from one of eight source groups (each of up to 12 channels per source, from 32 total channels) can be mixed and routed to up to 12 monitor output channels, formatted from mono through to 7.1.4 surround, providing the flexibility to monitor in a range of common setups including Dolby Atmos® and other immersive audio workflows. Alternatively, completely custom setups of up to 12 outputs can be configured for bespoke speaker configurations.
RedNet R1 can be set up to control groups of outputs from the multitude of sources and destinations available to Red interface users. From Pro Tools™ | HD and other DAWs, analogue inputs and outputs, ADAT and S/PDIF connections, and from entire Dante® audio ecosystems, audio can be switched and summed cross platforms, simultaneously and interchangeably. Top-panel control includes level, reference level preset selection, dim, mute and a variety of solo modes. There's an A/B switch for switching between monitoring presets, and up to four fold-down presets allow fast switching for checking downmixes.
RedNet R1 also features Dante-enabled talkback, an internal mic preamp for connecting an external talkback mic, built-in microphone and a high-powered headphones output, so you can monitor audio inputs and outputs, and interact with talent and other users on the system. Up to four talkback destination groups are available when used with a Red interface (when used with other Dante devices, a single talkback group is available).
Two LCDs display highly accurate level metering of the outputs, sources and headphone outputs, and provide visual cues for navigating menus. RedNet Control software is used to quickly set up both simple and complex monitoring and routing configurations. Other features include a quarter-inch jack socket, which accepts a footswitch for talkback management, LFE muting and more. RedNet R1 can be powered via Ethernet to reduce cabling complexity (using the PoE standard), or by the supplied DC power supply.
Smart Monitor Controller for Dante
Connect the Focusrite RedNet R1 desktop remote controller to your audio network with its included Cat 6 Ethernet cable for full control over your Red audio interfaces. Select, combine, and switch your signal signals from any combination of inputs and outputs on the network. Control large speaker arrays from a single remote controller. Monitor signals anywhere on the network with its built-in headphone output. You can even communicate with other rooms in your facility with the RedNet R1's built-in talkback mic. Complete with a vibrant color display for comprehensive level metering, the Focusrite RedNet R1 gives you the remote control capabilities you need in a professional environment.
Convenient remote control for your RedNet network
Because you'll be using the RedNet R1 as a component of a large-scale system, Focusrite makes it easy for you to control and re-route signals via a simple software control panel. No matter where you are in your facility, you'll have complete control over every Red device connected to that network. Whether you need to adjust the input level on a remote device, re-route multiple signals across your facility, manage a large loudspeaker rig, or communicate across the network with its built-in talkback mic
Features :
-
Desktop monitor controller for Red interfaces
-
Manage devices and signal routing remotely across your entire network
-
Communicate remotely with the built-in talkback mic, or your preferred external talkback mic
-
Can be powered via PoE; 12V DC power supply also included
-
Cat 6 Ethernet cable included
-
Free Brainworx bx_console re-creation of Focusrite's ISA 110 and ISA 130 modules