Dante Network Card
การ์ดเครือข่าย Dante สำหรับเครือขยายเสียง PowerMatch ให้ช่องอินพุต 8 ช่องที่มีความหน่วงต่ำโดยใช้เครือข่ายจอง Dante
The Dante™ network card for Bose® PowerMatch® configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate® Eight output channels are available for diagnostic monitoring from remote locations.
The Dante network card is installed into the digital expansion slot of the amplifier and includes a primary and secondary Gigabit Ethernet port. The secondary port can be configured for switched (default), redundant, or filtered for legacy product network connections. Up to 10 devices can be daisy-chained using the switched port configuration.
Bose ControlSpace® Designer™ software offers comprehensive device configuration and control for Dante endpoints, Bose ESP processors and PowerMatch amplifiers to help streamline system design and installation.
Features :
-
8x8 channel I/O
-
Diagnostic audio monitoring bus
-
Gigabit Ethernet connections
-
Port mode options for networking flexibility
-
Supports redundant connections
Applications :
The PowerMatch Dante network card provides 8x8 channels of digital audio using Dante, a digital audio networking solution. Dante operates over standard IP Ethernet networks with sample accurate synchronization and automatic device and channel discovery.
This card supports both switched and redundant operation – allowing PowerMatch amplifiers to be integrated into small systems without additional network hardware or larger systems utilizing multiple endpoints with redundant network design.
Designed for a wide range of applications, including:
-
Performing arts venues
-
Hotels and conferencing facilities
-
Religious and worship facilities
-
Health clubs
-
Retail and shopping centers
-
Sports venues
-
Schools and universities
Audio Channels :
-
Channels In : 8 (PM4500/N and PM4250/N models must select from upper or lower 4-channel groups)
-
Channels Out : 8, post-processing
-
Flows : Up to 16 simultaneous
Interface :
-
Connectors : Two 1 Gb (Gigabit) Ethernet RJ-45
-
Secondary Port Modes : Switched (default) / Redundant / Legacy Hardware (multicast filtered)
-
Format : 48 kHz / 24 bit PCM
-
Interface : Data Dante network audio
Indicators :
-
Rear Panel : Network speed indicator: yellow (1 Gb), green (100 Mb), Link/Act indicator: solid green (link established), flashing green (data activity)
Software Application :
-
ControlSpace® Designer™ Software v4.1 or later
Manuals :
Technical Information :