iFi audio : Gemini Cable 3.0 (USB3.0) 1.5m iFi audio

iFi Audio Gemini 3.0 Dual Headed USB 3.0 Cable with Separate Data/Audio and Power Signal Paths - 1.5m
หมายเลขสินค้า : Gemini Cable 3.0 (USB3.0) 1.5m

ราคา 22,900.00 บาท



เลือกจำนวน :

เลือกสี : สีเทา

  • สีเทา

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

iFi Audio Gemini 3.0 Dual Headed USB 3.0 Cable with Separate Data/Audio and Power Signal Paths - 1.5m
 
สายเคเบิลหัวเชื่อมต่อแบบ USB 3.0 B คุณภาพสูงที่จะช่วยส่งสัญญาณและข้อมูลเสียงได้อย่างสมบูรณ์พร้อมทั้งยังลดสัญญาณรบกวนได้ดีเยี่ยม ความยาวที่ 1.5 เมตร ใช้ตัวนำเมทริกซ์เงินทองแดงแบบต่อเนื่องของ OFHC แบบหนักเพื่อการถ่ายโอนสัญญาณที่ดีที่สุด โครงสร้างสายเคเบิลเป็นแบบขนานการเหนี่ยวนำขั้นต่ำที่กำหนดเองพร้อมการป้องกันแบบคู่ ซึ่งจะช่วยปกป้องสายเคเบิลจากสัญญาณรบกวน RFI และ EMI
 
Normal USB cables are not optimised for the highest quality audio.
The Gemini3.0 separates the audio and power cables to give you high-quality interference free audio.
 
Two. Deux. Zwei.
Whatever language you listen to music in, we know you prefer it as intererfence free as possible. You need the Gemini3.0 dual-headed cable. In most mass-produced USB cables, the signal and power cables are normally compacted together. This means two things – poor conductivity and they are not protected from one another. This leads to interference and degrades quality.
 
Degrees of separation
The Gemini3.0 cable carries the audio signal and power in two separate cables. This separates the delicate USB data signal from the USB power. No interference and sound quality remains unaffected.
 
Superior design. Better signal. Strong shielding.
We strictly adhere to the usb.org specifications. A key factor that is often overlooked is sticking to the 90 ohms impedance. This is achieved using the following exhaustive methods.
We use heavy OFHC continuous copper silver matrix conductors for the best possible signal transfer. The cable construction is a custom minimum inductance parallel type with dual shielding. This protects the cable from RFI and EMI noise and provides the cleanest transfer medium possible.
With the machined FINAL connectors and atypical RF3 filter designs, the iFi Gemini3.0 sets a whole new sonic benchmark for computer audio transmission.
 
The golden touch
The signal runs through the cable and the connector. This means the connector too must be exceptional.
Most USB cables use moulded plastic covered connections that do not shield the high frequencies present in the USB data link. Noise radiates out. Very few make their own connectors and rely on off-the-shelf components. These often lack durability.
Our FINAL USB connectors provide impeccable end-to-end RF shielding. They are machined entirely from solid, aircraft-grade aluminium. Plus their gold-plated connections make for years of steadfast service.
 
Two heads are better than one.
The power cable is heavier gauge than often found in standard USB cables. And signal and ground have their own respective geometry for optimal conductivity. There are dual-headed designs and then there is the Gemini3.0 dual headed design. Nothing comes close.
 

Features :
  • DEDICATED POWER AND DATA : The Gemini3.0 carries data and power in two separate cables so the data or audio signal is protected from interference.
  • HIGH QUALITY BUILD : Employs heavy OFHC continuous copper silver matrix conductors for the best possible signal transfer. Connectors provide impeccable end to end RF shielding, being machined entirely from solid, aircraft grade aluminium. The flat design of the cable prevents damage and wear.
  • HIGH FIDELITY : With separate and protected cables, and high quality materials and construction, your music will be cleaner and more pure.
  • NOISE ELIMINATOR : Fitted with three custom made metal oxide ceramic RF (Radio Frequency) noise silencers, each having a different effective range so that they greatly broaden the range over which RF noise is silenced
  • USB 3.0 : USB audio passes with the least disturbance

USB3 Data
  • Construction: Minimum inductance parallel construction
  • Conductors: 24 and 28AWG
  • Conductor material: Heavy OFHC continuous cast copper silver matrix
  • Insulation: HD Polyethylene
  • Shielding: Quadruple-shields
  • Impedance: 90Ohms
  • AC spark insulation : 1500V
  • Connectors: iFi ‘FINAL’ USB connectors
  • Insulation resistance: 100Mohm
  • Tensile strength: 1500PSI
USB(Power)
  • Construction: Minimum inductance parallel construction
  • Conductors: 12AWG
  • Conductor material: Heavy OFHC continuous cast copper
  • Insulation: Linear Polyethelyne (LPE) insulation
  • Current Rating: 30A
  • Lengths/Weights: 1.5m / 170g (0.37 lbs)