TURBOSOUND : TCS110B-WH TURBOSOUND

10" Band Pass Subwoofer for Installation Applications (White)
หมายเลขสินค้า : TCS110B-WH

ราคา 12,800.00 บาท

ราคาปกติ : 13,500.00 บาท

ประหยัดไป 700.00 บาท



เลือกจำนวน :

เลือกสี : สีขาว

  • สีขาว

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

10" Band Pass Subwoofer for Installation Applications (White)
 
ลำโพงซับเบส Turbosound Athens TCS110B Band Pass Subwoofer สีขาว ขนาดดอกลำโพง 10 นิ้ว LF driver, ทนกำลังขับ 300 W continuous, 1200 W peak, Impedance 8 Ω, ตอบสนองความถี่ 50 Hz – 150 Hz ±3 dB , Maximum SPL 119 dB continuous, 125 dB peak
 
ATHENS TCS110B-WH
The 1,200-Watt TCS110B-WH is a high performance 10" subwoofer system designed for a wide range of speech and music sound reinforcement applications. Engineered to work in conjunction with Turbosound loudspeaker management systems, the TCS110B-WH provides extended low frequency performance from a compact enclosure.
 
A dual port design enclosure, the TCS110B-WH features an extremely powerful, high excursion 10" low frequency driver with a specialised voice coil wound on both the inside and outside of the coil former for higher magnetic density, heat dissipation, higher power handling capacity, and improved efficiency. The TCS110B-WH provides fast and accurate transient response for virtually distortion-free operation – even in your most demanding performances.
 
Finished in a highly durable semi matt white paint, the cabinet is constructed from 15 mm (5⁄8") birch plywood with integral M10 threaded rigging points. The rear panel connector plate carries Neutrik speakON* NL4 and barrier strip connectors for input and link connections to additional enclosures.
 
Architecture & Engineering Specifications
The speaker shall be of the passive subwoofer type consisting of one 10" (262 mm) LF driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 50 Hz to 150 Hz and within -10 dB from 40 Hz to 200 Hz. Nominal dispersion shall be “half space.” Nominal impedance shall be 8 Ohms. Power handling shall be 300 Watts continuous, 1,200 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 94 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be 125 dB. Dimensions: 330 mm high x 585 mm wide x 330 mm deep (13.0" x 23.0" x 13.0"). Net weight: 15.8 kg (34.8 lbs). The loudspeaker system shall be the Turbosound TCS110B-WH . No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.

Features :
  • Band pass subwoofer for installation applications
  • 300 Watts continuous, 1,200 Watts peak power
  • HIgh excursion 10" low frequency driver with inside/outside wound coil
  • Low distortion dual port design for maximum sound pressure level
  • 15 mm (5⁄8") birch plywood enclosure with hard wearing semi matt white paint finish
  • Integral M10 rigging points for ease of installation
  • Neutrik speakON* NL4 and barrier strip connectors
  • Designed and engineered in the U.K.

System :
  • Frequency Response:
    • 50 Hz - 150 Hz ±3 dB
    • 40 Hz - 200 Hz -10 dB
  • Nominal Dispersion: Half space
  • Power Handling (IEC): 300 W continuous, 1200 W peak
  • Sensitivity: 94 dB (1 W @ 1 m)
  • Maximum SPL: 119 dB continuous, 125 dB peak
  • Impedance: 8 Ω
  • Components: 1 x 10" (262 mm) LF driver
Enclosure :
  • Connectors:
    • 1 x Neutrik speakON* NL4,
    • 1 x barrier strip terminals
  • Wiring: Pins 1+ / 1- input, pins 2+ / 2- link
  • Dimensions (H x W x D): 330 x 585 x330 mm (13.0 x 23.0 x 13.0")
  • Net Weight: 15.8 kg (34.8 lbs)
  • Construction: 15 mm (5/8") birch plywood
  • Finish: Semi matt white paint
  • Grille: Powder-coated perforated steel
  • Flying Hardware: M10 x 8