SYNCO : Mic-D1 SYNCO

Hypercardioid Shotgun Microphone

หมายเลขสินค้า : Mic-D1

video

ราคา 8,990^.00 บาท

ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีดำ

ฟรี!

ประกัน 1 ปี
ฟรี!

ปรึกษาด้านเทคนิก

Hypercardioid Shotgun Microphone

ไมโครโฟน Shotgun แบบ Hyper-Cardioid Condenser เป็นไมโครโฟนสำหรับการอัดเสียงโดยเฉพาะ ให้คุณภาพที่เหนือกว่าไมค์ติดกล้อง ช่วยตัดเสียงรอบข้างไม่ให้เข้ามารบกวน เชื่อมต่อกับตัวบันทึกเสียงผ่านพอร์ตเชื่อมต่อแบบมาตรฐาน XLR

Tight Sound Pickup

Whereas traditional shotgun mics use supercardioid polar patterns, the Mic-D1 utilizes a hypercardioid pickup pattern to provide even tighter frontal focus, more attenuation at the sides, and slightly increased rear pickup, making it an ideal choice for recording in indoor or outdoor environments.

The Mic-D1's circuit employs a switchable 180 Hz high-pass filter to attenuate common sources of low-frequency buildup such as rumble, allowing its tone to complement sound effects as well as dialogue.

Battery or Phantom Powered

The Mic-D1 is compliant with 48V phantom powering for use with field recorders, external mic preamps, and professional camcorders. Alternatively, a single AA battery (available separately) can power the Mic-D1 for up to 100 hours when using the mic with devices that don't supply phantom power—mirrorless cameras, DSLRs, and passive mixer adapters.

XLR Output and Multiple Cables

The balanced 3-pin XLR output features gold-plated contacts to improve conductivity and maintain the integrity of your signal. Use the included XLR cable to connect the Mic-D1 to a preamp that can supply 48V phantom power or opt for the supplied XLR to 3.5mm cable to plug the Mic-D1 directly into a camera or portable audio recorder that doesn't provide phantom power.

Ideal for Boompole Mounting

Lightweight and just over 11" long, the Mic-D1 is well suited for use on a boompole or mic stand. It includes a mic holder with 5/8" and 3/8" options for mounting versatility.

Windscreen Minimizes Wind Noise

The Mic-D1 includes a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners.

Features :

For Indie Films, TV & Documentaries
100-Hour AA Battery or Phantom Powered
Hypercardioid Polar Pattern
Switchable 180 Hz High-Pass Filter
High Resistance to Interference
High Maximum SPL Before Distortion
XLR Output with Gold-Plated Contacts
Windscreen Reduces Wind Noise
Lightweight Brass Housing
Includes Mic Holder and XLR Cable

Microphone

Form Factor : Stand/Boom Mount
Sound Field : Mono
Operating Principle : Pressure Gradient
Capsule : 1 x Electret Condenser
Polar Pattern : Hypercardioid
Orientation : End Address
Circuitry : Solid-State
Pad : None
High-Pass Filter : 180 Hz
Tone Adjustment : None
Indicators : None
On-Board Controls : High-Pass Filter
Windscreen : Foam (Included)

Performance

Frequency Range : 40 Hz to 20 kHz
Maximum SPL : 130 dB SPL
Impedance : 500 Ohms (Phantom Power) / 600 Ohms (Battery Power)
Sensitivity : -34 dBV/Pa at 1 kHz (Phantom Power) / -32 dBV/Pa at 1 kHz (Battery Power)
Dynamic Range : 106 dB (Phantom Power, 1 kHz, at Max SPL) / 91 dB (Battery Power, 1 kHz, at Max SPL)
Signal-to-Noise Ratio : 78 dB (1 kHz)

Connectivity