SYNCO : WAir-G2-A1 SYNCO

Ultracompact Digital Wireless Microphone System for Mirrorless/DSLR Cameras (2.4 GHz)
หมายเลขสินค้า : WAir-G2-A1

ราคา 5,990.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

Ultracompact Digital Wireless Microphone System for Mirrorless/DSLR Cameras (2.4 GHz)
 
ชุดตัวรับ-ส่งสัญญาณเสียงแบบไร้สายดิจิตอลช่องสัญญาณเดียวขนาดกะทัดรัดพิเศษ มีตัวส่งสัญญาณพร้อมไมโครโฟนในตัวและตัวรับสัญญาณ อย่างละเครื่อง รับคลื่นสัญญาณได้สองช่องทาง ทำงานในย่านความถี่ 2.4 GHz จอแสดงผลสีแบบ TFT แบตเตอรี่ใช้งานได้ยาวนานถึง 8 ชั่วโมง และชาร์จใหม่ได้ภายใน 1.5 ชั่วโมงผ่านพอร์ต USB Type-C มีสายชาร์จแบบทูอินวัน ใช้ได้กับกล้องมิเรอร์เลส/DSLR หรืออุปกรณ์มือถือที่มีอินพุต 3.5 มม. เหมาะสำหรับการถ่ายวิดีโอสำหรับ Instagram, YouTube และ TikTok นำเสนอโซลูชันที่สมบูรณ์ หลากหลาย และใช้งานง่ายสำหรับการบันทึกบทสนทนา การสัมภาษณ์
 
Portable Wireless Microphone SYNCO G2(A1)
The G2 is the 2nd generation portable wireless microphone of SYNCO running at 2.4GHz band. It is reborn with a display, making all key indicators seeable. It continues processing the input audio via patented technology and sending clean, clear audio based on 2.4GHz digital transmission technology. Similar to the G1, this wireless microphone system also comes in 2 forms, including this 1-to-1 G2(A1) and the 1-to-2 G2(A2). The G2(A1) with one transmitter and one receiver, is an excellent wireless mic solution for content creators in every field: stage performers, on-camera presenters, vloggers and more.
 
Brandnew TFT Display as Strong Boost to SYNCO 2.4 GHz System
Different from G1, either the transmitter or the receiver of this new microphone wireless at 2.4G carries a true-color TFT display to make the device readable under different light intensities. The recording mode, battery status, and audio level are all seeable. 
 
Upgraded Algorithm for More Stable, Safe Transmission
The SyncoderTM Encrypted Transmission Algorithm 2.0 in this small wireless microphone enhances the signal stability within 492ft/150m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It is the Frequency Hopping Spread Spectrum (FHSS) technique that on it’s own intuitive detects the location and then turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.
 
Integrated Signal Processing for Little Latency Sound Production
The Digital Signal Processor (DSP) chip in the SYNCO G2 optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery guarantees almost no latency in transmission and high quality in sound production, excellent for immediate use and suitable for live streaming.
 
Quick Charge for Every Continued Filming
The 2-in-1 charging solution allows simultaneous charging of the wireless microphone receiver and transmitter with only one power source. It takes only 40 mins to get the device 50% powered and 1 hour for 80%. The enhanced battery supports 8-hour continued recording if fully charged.  
 
Small Features Packed For Each Optimization
A button is designed to mute this wireless microphone for a while rather than turning off the whole system when team communication, device setup, etc. is a must. The low cut, gain control, and real-time monitoring function to give a wider range of adjustment, hence making sure that the system works under more conditions.
 
Pocket Size for Invisible but Audible Effect
Mobile content creators would like the mini wireless microphone G2. The transmitter and receiver each weighs only 39g and is 52*42*17mm sized, easy to be concealed and inconspicuous in most recording scenarios.



Features:
  • For Journalists, Vloggers, YouTubers
  • Transmitter with Built-In Mic + Lav Mic
  • Ultracompact Single-Channel Receiver
  • Connects to 3.5mm Input on Camera

Transmitter (TX )
 
  • Wireless Transmission : Digital 2.4GHz
  • RF Frequency Band : 2400-2483.5MHz
  • Frequency Response : 20Hz-20KHz
  • Working Distance : 492ft/150m(LOS area),
  • 164ft/50m(NLOS area)
  • Mounting : Pocket Clip
  • Audio Input : 1/8" / 3.5mm TRS Mic Input
  • Audio Input Level : 1V (0dBV)
  • RF Output Power : <10mW
  • Power Requirements : 3.3V-4.7V
  • Battery Type : Built-in Lithium Battery, 500mAh
  • Battery Charging Time : 1.5h
  • Battery Life : 8h
  • Display : TFT Screen
  • Dimensions : 52×42×17mm
  • Material : Plastic
  • Weight : 39g
 
Receiver (RX)
 
  • Wireless Transmission : Digital 2.4GHz
  • RF Frequency Band : 2400-2483.5MHz
  • Approximate RF Sensitivity : -81dBm
  • Working Distance : 492ft/150m(LOS area),
  • 164ft/50m(NLOS area)
  • Mounting : Pocket Clip
  • Number of Audio Channels : 1
  • Audio Output : 1/8” / 3.5mm TRS Mic Output
  • 1/8“ / 3.5mm TRS Headphone Output
  • Gain : 0-5 Level
  • Audio Output Level : Line Out: 1V; Monitoring: 25-30mW
  • Power Requirements : 3.3V-4.7V
  • Battery Type : Built-in Lithium Battery, 500mAh
  • Battery Charging Time : 1.5h
  • Battery Life : 8h
  • Display : TFT Screen
  • Dimensions : 52×42×17mm
  • Material Plastic
  • Weight 39g
 
 
Microphone
 
  • Form Factor : Built-in/External Mic
  • Sound Field : Mono
  • Polar Pattern : Omnidirectional
  • Frequency Range : 50Hz-20KHz
  • Sensitivity : -40dB (±3 dB, re 1V/Pa at 1KHz)
  • Max. SPL : 135dB SPL (at 1KHz)